IC694MDL741

IC694MDL741 DC Negative Logic Output Module: Reliable Low-Voltage Solution

The IC694MDL741 is a 12/24 Volt DC negative logic output module with a capacity of 0.5 Amps per point, providing a total of 16 output points. These outputs are divided into two groups of eight, each with a common power output terminal. With its negative logic characteristics, the module sinks current from the loads to the user-supplied common or negative power bus. Output devices are connected between the positive power bus and the output terminals. This module is compatible with a wide range of load devices, such as motor starters, solenoids, and indicators, making it suitable for various industrial applications. Power to operate the field devices must be supplied by the user.

Each output point has an individual numbered LED to display the ON/OFF status. There are no fuses on this module. The blue bands on the label indicate that the MDL741 is a low-voltage module. It can be installed in any I/O slot within an RX3i system.
Technical Specifications and Performance

    Rated Voltage: 12/24 Volts DC
    Output Voltage Range: 12 to 24 Volts DC (+20%, -15%)
    Number of Outputs: 16 (two groups of eight outputs each)
    Isolation: 250 Volts AC continuous, tested up to 1500 Volts AC
    Output Current: Maximum 0.5 Amps per point, 2 Amps maximum per group
    Power Consumption: 110 mA (with all outputs on) from the 5-volt bus on the backplane
    Output Voltage Drop: 0.5 Volts maximum
    Off-State Leakage Current: 1 mA maximum
    On and Off Response Time: Maximum 2 ms

Wiring Connections

The terminal connections for each output are as follows:

    Terminal 1: Common return for outputs 1-8
    Terminals 2-9: Outputs 1 to 8
    Terminal 10: DC +
    Terminal 11: Common return for outputs 9-16
    Terminals 12-19: Outputs 9 to 16
    Terminal 20: DC +

Recommendations and Advice

The IC694MDL741 module provides reliable control in low-voltage industrial automation applications with its negative logic output characteristics. It is ideal for controlling motor starters, solenoids, and indicator devices in a wide range of applications. As there are no internal fuses, it is recommended to use external fuses for protection. With its fast response time and low leakage current, this module offers efficient and reliable performance.

In conclusion, the IC694MDL741 is a robust and flexible solution for low-voltage applications, offering long-term reliability in industrial environments.

>> IC694MDL741 Output modules User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC694MDL741 Output modules and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."