IC694MDL340

IC694MDL340 AC Output Module: Reliable Solution for a Wide Range of Applications

The IC694MDL340 is a 120 Volt AC output module with a capacity of 0.5 Amps per point, offering a total of 16 output points. These points are divided into two isolated groups of eight outputs each, with separate commons for each group. The commons are not tied together within the module, allowing the groups to be connected to different AC phases or powered from the same supply. Each group is protected by a 3 Amp fuse, and an RC snubber circuit is present for each output to protect against transient electrical noise.

This module is highly versatile in industrial automation systems and is especially suitable for controlling inductive and incandescent loads. It requires an AC power source provided by the user, as it cannot operate with a DC power source. The status of each output point is indicated by individual numbered LEDs, and a red LED (F) lights up if either of the fuses blows. A load must be connected to the blown fuse for the indicator to activate. The red bands on the label indicate that the MDL340 is a high-voltage module.

Technical Specifications and Performance

    Input Voltage: 120 Volt AC, 50/60 Hz
    Output Capacity: Maximum 0.5 Amps per output point
    Number of Outputs: 16 (two isolated groups of 8 outputs each)
    Isolation: 250 Volts AC continuous, tested up to 1500 Volts AC
    Inrush Current Capacity: Up to 20 Amps for one cycle (high inrush current)
    Power Consumption: 315 mA (with all outputs on)
    Minimum Load Current: 50 mA
    Output Voltage Drop: 1.5 Volts maximum
    Output Leakage Current: Maximum 2 mA at 120 Volts AC
    On Response Time: Maximum 1 ms
    Off Response Time: 1/2 cycle maximum

Fuses

The module is protected by two 3 Amp fuses (GE Fanuc part number: 44A724627-111). If a fuse blows, the red LED will light up, providing a clear indication of the issue for quick troubleshooting.

Wiring Connections

The terminal connections for each output point are as follows:

    1 - 8 Terminals: First group of outputs
    9: Common return for outputs 1-8
    11 - 18 Terminals: Second group of outputs
    19: Common return for outputs 9-16

Recommendations and Advice

The IC694MDL340 module offers reliable long-term solutions in industrial automation systems, thanks to its robust design and high inrush current capacity. It is particularly well-suited for controlling inductive and incandescent loads. When installing the module, keep in mind that the two groups are isolated from each other, and each group is protected by separate fuses. If a fuse blows, the LED indicator will quickly notify you, minimizing troubleshooting time.

In environments with high electrical noise, the module’s RC snubber circuits will provide protection, ensuring safe operation. Additionally, the flexibility to operate the module on different phases or from the same power supply is a valuable advantage. Overall, the IC694MDL340 is a durable and reliable solution for high-voltage control applications, offering consistent performance in demanding environments.


>> IC694MDL340 Output modules User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC694MDL340 Output modules and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."