IC694MDL230
IC694MDL230: 120 Volt AC, 8 Point Isolated Input Module
The IC694MDL230 is a 120-volt AC isolated input module that provides 8 isolated input points, each powered by a separate AC power source. Since the inputs are isolated, each one can operate independently with its own power supply. The input circuits are reactive (resistor/capacitor), and when current flows into an input point, it registers as a logic "1" in the input status table (%I).
This module is compatible with a wide variety of input devices, such as pushbuttons, limit switches, and electronic proximity switches. However, the power to operate field devices must be supplied by the user, and this module requires an AC power source; it is not compatible with DC power sources.
The module features 8 green LEDs that display the ON/OFF status for points 1 through 8. Red bands on the label indicate that the IC694MDL230 is a high-voltage module. It can be installed in any I/O slot of an RX3i system.
Technical Specifications:
Rated Voltage: 120 volts AC, 50/60 Hz
Input Voltage Range: 0-132 volts AC, 50/60 Hz
Inputs per Module: 8 (each input point has a separate common terminal)
Isolation:
Field to Backplane (optical) and to frame ground: 250 VAC continuous; 1500 VAC for one minute
Point to Point: 250 VAC continuous; 1500 VAC for one minute
Input Current: Typically 14.5 mA at rated voltage
Input Characteristics:
On-state Voltage: 74 to 132 volts AC
Off-state Voltage: 0 to 20 volts AC
On-state Current: Minimum 6 mA
Off-state Current: Maximum 2.2 mA
On Response Time: 30 ms maximum
Off Response Time: 45 ms maximum
Power Consumption: 60 mA (with all inputs on) from the 5-volt backplane bus
Wiring:
Each input point has a separate return terminal, ensuring proper isolation. The wiring scheme for the module is as follows:
Terminals: 2, 4, 6, 8, 12, 14, 16, 18 are the input terminals, and 3, 5, 7, 9, 13, 15, 17, 19 are the corresponding return connections.
The IC694MDL230 is a robust 120-volt AC input module with 8 isolated input points, designed for high-voltage environments. It’s ideal for use with a wide range of input devices, providing reliable operation in industrial applications. Since it requires an external power source for field devices, it’s well-suited for environments where flexibility and isolation are critical.
>> IC694MDL230 input modules User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)