Ge Fanuc Pac RX7i
RX7i Features and Specifications
CPE010, CPE020, and CRE020 Models
IC698CPE010: 300 MHz CPU microprocessor
IC698CPE020: 700 MHz CPU microprocessor
IC698CRE020: 700 MHz CPU microprocessor with redundancy support
Serial Ports
These CPUs have three independent serial ports accessible from the front of the module. Ports 1 and 2 provide communication with external devices and can be used for firmware updates. The third serial port is used for the Ethernet Station Manager. All serial ports are isolated.
CPU Indicators (LEDs)
Five LED indicators show the operating status of the CPU:
OK (Green): CPU is functioning properly.
OK (Off): CPU problem. Contact technical support if the RUN and EN LEDs are blinking in an error pattern.
OK, EN, RUN (Blinking): CPU is in boot mode, awaiting a firmware update.
RUN (Green): CPU is in Run mode.
EN (Green): Output scan is enabled.
C1 and C2: Indicate signal activity on serial ports 1 and 2.
Technical Specifications
Memory Capacity: 10 MB battery-backed RAM and 10 MB non-volatile flash memory.
Power Requirements:
CPE010: +5 VDC: 3.2 Amps, +12 VDC: 0.042 Amps, -12 VDC: 0.008 Amps
CPE020, CRE020: +5 VDC: 4.5 Amps, +12 VDC: 0.042 Amps, -12 VDC: 0.008 Amps
Operating Temperature:
CPE010: 0°C - 50°C (with fan tray: 0°C - 60°C)
CPE020, CRE020: 0°C - 60°C (fan tray required)
Execution Speed:
CPE010: 0.195ms per 1000 Boolean contacts
CPE020, CRE020: 0.14ms per 1000 Boolean contacts
Embedded Communication: RS-232, RS-485, Ethernet interface
Serial Protocols: Modbus RTU Slave, SNP, Serial I/O
Program Blocks: Supports up to 512 program blocks, each with a maximum size of 128KB.
Memory:
%I and %Q: 32Kbits for discrete inputs and outputs
%AI and %AQ: Configurable up to 32Kwords
%W: Configurable up to the maximum available user RAM
Managed Memory: Configurable up to 10 MB
Ethernet Features:
Supports 10/100 Mbps half/full duplex Ethernet
Up to 16 web server and FTP connections
Battery Life
With the IC698ACC701 battery pack, memory retention is estimated at 5 years at 20°C. For long-term backup, an external IC693ACC302 Auxiliary Battery Module can be used.
>> Ge Fanuc Pac RX7i User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)