Gd20 user manual

INVT GD20 User Manual and Technical Reference

The INVT Goodrive20 (GD20) user manual is the main technical reference for installation, parameter setup, commissioning and fault diagnosis of the drive. It is useful both during first installation and later when a machine is being serviced, modified or recommissioned.

Before changing any parameter, confirm the complete GD20 model number and the motor nameplate data. Different voltage and power versions may use different hardware arrangements, while incorrect motor data can affect both control performance and protection functions.

What the GD20 Manual Covers

The GD20 documentation includes information on:

- Drive installation and mounting
- Main power and motor wiring
- Control-terminal connections
- Motor nameplate parameters
- V/F and vector-control settings
- Acceleration and deceleration parameters
- Digital and analog input/output functions
- RS485 communication settings
- Protection functions and fault diagnosis

For machines already in operation, the manual is especially useful when checking whether a parameter has been changed from the original commissioning value or when comparing the current drive setup with the connected motor and mechanical load.

Download the INVT GD20 User Manual

+ INVT GD20 User Manual (English PDF)

Before Commissioning the GD20

A few checks before the first RUN command can prevent many setup problems:

- Verify that the incoming supply matches the drive voltage class.
- Check the motor rated voltage, current, frequency, speed and power.
- Confirm the U, V and W motor connections.
- Check protective grounding.
- Select the correct run-command source.
- Verify the speed or frequency reference source.
- Check digital and analog terminal assignments.
- Set acceleration and deceleration times according to the machine.
- Make sure the mechanical system is safe to operate.

Parameter Changes and Motor Setup

When a GD20 is installed on a different motor or transferred from another machine, review the motor parameters before operation. Stored settings from a previous application may not match the new motor.

If the selected control method requires motor identification, perform the appropriate auto-tuning procedure only after confirming the motor data and mechanical conditions described in the manual.

If the GD20 Displays a Fault

Record the fault code before resetting the drive. A fault code together with the motor load, operating frequency and machine condition at the time of the trip usually provides more useful diagnostic information than repeatedly clearing the alarm.

For model-specific troubleshooting, see the INVT GD20 fault codes section.

Related INVT GD20 Resources

+ INVT GD20 Main Page

+ INVT GD20 Fault Codes

+ INVT User Manuals and Technical Documents

+ INVT Commissioning and Application Notes

+ INVT Contact and Technical Support

+ INVT Main Page


Refine Search