POD UG40

POD UG40 series

UG40 is an older POD operator-panel generation. UG400H, UG340H and UG440H appearing together does not make them the same display or cable.

Codes and technical differences

Hakko separately lists March 2008 for UG400H-T/S/L0 and September 2020 for UG340H and UG440H production end.

Before replacement

Record the rear label, working screen project, supply, communication ports and panel cut-out. A suggested newer generation still requires project conversion and a cable check.

Fuji HMI / MONITOUCH leads to other parts of the same generation. To distinguish nearby codes, see POD UG40 — UG400 series. HMI technical documents helps locate the manual for the exact model code.

Fuji operator panels covers the other families. To edit the screen project, see HMI software.


Refine Search