FLEX-PC N

FLEX-PC N: older Fuji PLC hardware and programs

FLEX-PC N is an earlier Fuji Electric programmable-controller family. A PLC reads machine inputs and operates outputs according to its program. Do not treat NB, NJ and NS CPU variants as one interchangeable controller: replacement hardware, project files and programming cables depend on the full CPU code. The Fuji PLC section shows other families.

Which programming tool is needed?

A Fuji support record names Standard V2 / FLEX SX PLCProgrammer and NP4H-SWN for NB/NJ/NS programming. This does not prove that they use the same project format or support every current Windows release. The actual CPU, source project and serial connection determine the correct workflow. The tools are grouped under Fuji PLC software.

Information to preserve during maintenance

Before changing a FLEX-PC N CPU, back up the program and document I/O addresses, power supply, expansion modules and communication port. Fuji says cable or converter requirements vary by unit. A connector that looks similar is not enough to select a programming cable. CPU records appear in Fuji PLC basic units; expansion parts appear in Fuji PLC modules.

Check PLC CPU documents for manual titles. A later MICREX-SX SPH or SPB unit does not automatically open an older FLEX-PC N program without conversion.


Refine Search