EL-25
EL-25 is an operator panel identified by its complete hardware code in the UniOP E / ET family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.
Match the supply, port layout and cabinet cut-out of EL-25 against its nameplate and technical drawing. Compare connector orientation and mounting dimensions with the installed panel.
Within UniOP E / ET, EL, ER, EC and ET types remain distinct, as do their resolution differences. A similar model name does not prove an identical display or connection architecture. Use the complete EL-25 code when selecting within this family.
What matters on the installed machine?
The display arrangement of EL-25 must be checked on the installed nameplate and front panel. Compare EF-02 before deciding on a substitute. Matching a plug does not preserve the operator’s screen and key layout.
For EL-25, verify the Designer / Designer 6 release, protocol option and whether the archived project opens. A related code such as EF-02 does not establish the same software target.
Record the current display behavior before changing EL-25. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.
Around EL-25, compare EF-04, ER-04 and EL-16. Check each complete code and connection on its own page.
PDF manuals
Documents include UniOP Installation Guide v1.08, UniOP Installation Guide v1.09. For EL-25, match the full code and hardware period against UniOP E / ET PDF Manuals.