ER-04
ER-04 is an operator panel identified by its complete hardware code in the UniOP E / ET family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.
Match the supply, port layout and cabinet cut-out of ER-04 against its nameplate and technical drawing. Compare connector orientation and mounting dimensions with the installed panel.
Within UniOP E / ET, EL, ER, EC and ET types remain distinct, as do their resolution differences. A similar model name does not prove an identical display or connection architecture. Use the complete ER-04 code when selecting within this family.
What matters on the installed machine?
The display arrangement of ER-04 must be checked on the installed nameplate and front panel. Compare EF-02 before deciding on a substitute. Matching a plug does not preserve the operator’s screen and key layout.
For ER-04, verify the Designer / Designer 6 release, protocol option and whether the archived project opens. A related code such as EF-02 does not establish the same software target.
Record the current display behavior before changing ER-04. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.
Around ER-04, compare EF-04, EL-16 and EL-16N. Check each complete code and connection on its own page.
PDF manuals
Documents include UniOP Installation Guide v1.08, UniOP Installation Guide v1.09. For ER-04, match the full code and hardware period against UniOP E / ET PDF Manuals.