eTOP512

eTOP512 is the 12.1 inch; 800×600 operator panel in the eTOP500 family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.

The recorded display or hardware distinction for eTOP512 is 12.1 inch; 800×600. Match the supply, port layout and cabinet cut-out of eTOP512 against its nameplate and technical drawing. Compare connector orientation and mounting dimensions with the installed panel.

eTOP500 is a JMobile-generation touch-panel family. Projects from the 300 series are not assumed directly equivalent; the slot arrangement of the 504 model remains a selection factor. Use the complete eTOP512 code when selecting within this family.

What matters on the installed machine?

eTOP512 has the recorded 12.1 inch; 800×600 arrangement; check that the operator screens fit this display. Compare eTOP504 (4.3 inch; 480×272) before deciding on a substitute. Matching a plug does not preserve the operator’s screen and key layout.

For eTOP512, verify the JMobile Studio release, protocol option and whether the archived project opens. A related code such as eTOP504 does not establish the same software target.

Record the current display behavior before changing eTOP512. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.

Around eTOP512, compare eTOP506 (5.7 inch; 320×240), eTOP507 (7 inch; 800×480) and eTOP507M (7 inch; 800×480; M variant). Check each complete code and connection on its own page.

PDF manuals

Documents include EXOR 2015 archive catalogue. For eTOP512, match 12.1 inch; 800×600 details against eTOP500 PDF Manuals.