eTOP500

eTOP500 occupies a distinct place among Exor / UniOP panels through its display, operator controls and software generation. eTOP500 is a JMobile-generation touch-panel family. Projects from the 300 series are not assumed directly equivalent; the slot arrangement of the 504 model remains a selection factor.

The family includes models such as eTOP504, eTOP506, eTOP507, eTOP507M, eTOP510. They should be read as distinct hardware references: a change in display, input method, connection or revision can affect both the installed project and the panel cut-out.

What matters on the installed machine?

eTOP500 includes choices such as eTOP504 and eTOP506. The first examples differ in 4.3 inch; 480×272 and 5.7 inch; 320×240.

Check the project backup, cable arrangement and operator workflow against the exact member of eTOP500. Sharing a family name does not establish the same cabinet cut-out or software target.

Record the current display behavior before changing eTOP500. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.

Around eTOP500, compare eTOP507 (7 inch; 800×480), eTOP507M (7 inch; 800×480; M variant) and eTOP510 (10.4 inch; 800×600). Check each complete code and connection on its own page.

PDF manuals

Documents include EXOR 2015 archive catalogue. For eTOP500, match the full code and hardware period against eTOP500 PDF Manuals.


Refine Search