eTOP312
eTOP312 is the 12.1 inch; 800×600 operator panel in the eTOP300 family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.
The recorded display or hardware distinction for eTOP312 is 12.1 inch; 800×600. Match the supply, port layout and cabinet cut-out of eTOP312 against its nameplate and technical drawing. Compare connector orientation and mounting dimensions with the installed panel.
eTOP300 is a touch-panel family from the Designer generation. Check hardware date, full model, port architecture and the software release able to open the project separately. Use the complete eTOP312 code when selecting within this family.
What matters on the installed machine?
eTOP312 has the recorded 12.1 inch; 800×600 arrangement; check that the operator screens fit this display. Compare eTOP306 (5.7 inch; 320×240) before deciding on a substitute. Matching a plug does not preserve the operator’s screen and key layout.
For eTOP312, verify the Designer / Designer 6 release, protocol option and whether the archived project opens. A related code such as eTOP306 does not establish the same software target.
Record the current display behavior before changing eTOP312. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.
Around eTOP312, compare eTOP307 (7 inch; 800×480), eTOP310 (10.4 inch; 640×480) and eTOP313 (13.3 inch; 1280×800). Check each complete code and connection on its own page.
PDF manuals
Documents include EXOR 2015 archive catalogue. For eTOP312, match 12.1 inch; 800×600 details against eTOP300 PDF Manuals.