eTOP300
eTOP300 occupies a distinct place among Exor / UniOP panels through its display, operator controls and software generation. eTOP300 is a touch-panel family from the Designer generation. Check hardware date, full model, port architecture and the software release able to open the project separately.
The family includes models such as eTOP306, eTOP307, eTOP310, eTOP312, eTOP313. They should be read as distinct hardware references: a change in display, input method, connection or revision can affect both the installed project and the panel cut-out.
What matters on the installed machine?
eTOP300 includes choices such as eTOP306 and eTOP307. The first examples differ in 5.7 inch; 320×240 and 7 inch; 800×480.
Check the project backup, cable arrangement and operator workflow against the exact member of eTOP300. Sharing a family name does not establish the same cabinet cut-out or software target.
Record the current display behavior before changing eTOP300. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.
Around eTOP300, compare eTOP310 (10.4 inch; 640×480), eTOP312 (12.1 inch; 800×600) and eTOP313 (13.3 inch; 1280×800). Check each complete code and connection on its own page.
PDF manuals
Documents include EXOR 2015 archive catalogue. For eTOP300, match the full code and hardware period against eTOP300 PDF Manuals.