eX710
eX710 is the 10.1 inch; 1280×800; PCAP operator panel in the eX700 family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.
The 2017 eX710 documentation lists an optional CODESYS licence. If the installed panel uses it, record the licence state alongside the project backup. Compare supply, port layout and cabinet cut-out against the nameplate and technical drawing.
eX700 is a high-performance HMI family covering 705, 707, 710, 715 and 721 sizes. M and later variants are not automatically treated as the same hardware as the base model. Use the complete eX710 code when selecting within this family.
What matters on the installed machine?
eX710 has the recorded 10.1 inch; 1280×800; PCAP arrangement; check that the operator screens fit this display. Compare eX705 (5 inch; 800×480; PCAP) before deciding on a substitute. Matching a plug does not preserve the operator’s screen and key layout.
For eX710, verify the JMobile Studio release, protocol option and whether the archived project opens. A related code such as eX705 does not establish the same software target.
Record the current display behavior before changing eX710. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.
Around eX710, compare eX707 (7 inch; 800×480; PCAP), eX715 (15.6 inch; 1366×768; PCAP) and eX721 (21.5 inch; 1920×1080; PCAP). Check each complete code and connection on its own page.
PDF manuals
Documents include eX700 Series User Manual v2.00, eX700 Series 2017 brochure. For eX710, match 10.1 inch; 1280×800; PCAP details against eX700 PDF Manuals.