eX721

eX721 is the 21.5 inch; 1920×1080; PCAP operator panel in the eX700 family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.

The recorded display or hardware distinction for eX721 is 21.5 inch; 1920×1080; PCAP. Match the supply, port layout and cabinet cut-out of eX721 against its nameplate and technical drawing. Compare connector orientation and mounting dimensions with the installed panel.

eX700 is a high-performance HMI family covering 705, 707, 710, 715 and 721 sizes. M and later variants are not automatically treated as the same hardware as the base model. Use the complete eX721 code when selecting within this family.

What matters on the installed machine?

eX721 has the recorded 21.5 inch; 1920×1080; PCAP arrangement; check that the operator screens fit this display. Compare eX705 (5 inch; 800×480; PCAP) before deciding on a substitute. Matching a plug does not preserve the operator’s screen and key layout.

For eX721, verify the JMobile Studio release, protocol option and whether the archived project opens. A related code such as eX705 does not establish the same software target.

Record the current display behavior before changing eX721. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.

Around eX721, compare eX707 (7 inch; 800×480; PCAP), eX710 (10.1 inch; 1280×800; PCAP) and eX715 (15.6 inch; 1366×768; PCAP). Check each complete code and connection on its own page.

PDF manuals

Documents include eX700 Series User Manual v2.00, eX700 Series 2017 brochure. For eX721, match 21.5 inch; 1920×1080; PCAP details against eX700 PDF Manuals.