eTOP515G

eTOP515G is the 15 inch; 1024×768; PCAP operator panel in the eTOP500 Glass family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.

The recorded display or hardware distinction for eTOP515G is 15 inch; 1024×768; PCAP. Match the supply, port layout and cabinet cut-out of eTOP515G against its nameplate and technical drawing. Compare connector orientation and mounting dimensions with the installed panel.

eTOP500 Glass covers glass-front projected-capacitive touch variants. G and MG are distinct model identifiers; mechanical equivalence with a classic panel of the same screen size is not assumed. Use the complete eTOP515G code when selecting within this family.

What matters on the installed machine?

eTOP515G has the recorded 15 inch; 1024×768; PCAP arrangement; check that the operator screens fit this display. Compare eTOP507G (7 inch; 800×480; PCAP) before deciding on a substitute. Matching a plug does not preserve the operator’s screen and key layout.

For eTOP515G, verify the JMobile Studio release, protocol option and whether the archived project opens. A related code such as eTOP507G does not establish the same software target.

Record the current display behavior before changing eTOP515G. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.

For eTOP515G, compare the display and hardware details on eTOP507G and eTOP507MG. Check the suffix, port layout and cabinet cut-out of each family member against the installed device.

PDF manuals

Documents include EXOR 2015 archive catalogue. For eTOP515G, match 15 inch; 1024×768; PCAP details against eTOP500 Glass PDF Manuals.