eTOP507G
eTOP507G is the 7 inch; 800×480; PCAP operator panel in the eTOP500 Glass family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.
The recorded display or hardware distinction for eTOP507G is 7 inch; 800×480; PCAP. Match the supply, port layout and cabinet cut-out of eTOP507G against its nameplate and technical drawing. Compare connector orientation and mounting dimensions with the installed panel.
eTOP500 Glass covers glass-front projected-capacitive touch variants. G and MG are distinct model identifiers; mechanical equivalence with a classic panel of the same screen size is not assumed. Use the complete eTOP507G code when selecting within this family.
What matters on the installed machine?
eTOP507G has the recorded 7 inch; 800×480; PCAP arrangement; check that the operator screens fit this display. Compare eTOP507MG (7 inch; 800×480; PCAP) before deciding on a substitute. Matching a plug does not preserve the operator’s screen and key layout.
For eTOP507G, verify the JMobile Studio release, protocol option and whether the archived project opens. A related code such as eTOP507MG does not establish the same software target.
Record the current display behavior before changing eTOP507G. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.
For eTOP507G, compare the display and hardware details on eTOP507MG and eTOP515G. Check the suffix, port layout and cabinet cut-out of each family member against the installed device.
PDF manuals
Documents include EXOR 2015 archive catalogue. For eTOP507G, match 7 inch; 800×480; PCAP details against eTOP500 Glass PDF Manuals.