PLCM01-NEC
PLCM01-NEC belongs to eTOP500 / 600 Options and serves as CAN + CODESYS option with restricted expansion/stacking. Its role depends on the host-panel generation and the connection actually used in the cabinet.
For PLCM01-NEC, check CAN + CODESYS option with restricted expansion/stacking against the exact host-panel configuration. Match its complete code, port and option slot to that installation.
What matters on the installed machine?
PLCM01-NEC serves as CAN + CODESYS option with restricted expansion/stacking. Check the actual connector or mounting position and the host-panel generation before selecting it.
Compare PLCM01-NEC (CAN + CODESYS option with restricted expansion/stacking) with PLCM01-CDS (CAN module + CODESYS option); similar connectors do not establish the same duty. Test the function after installation on the running system.
Before changing PLCM01-NEC, record its connector position and the function it provides to the host panel. Test that function after installation with the original communication or mounting arrangement.
For PLCM01-NEC, confirm that the host supports CAN + CODESYS option with restricted expansion/stacking. Match the part code with the host’s option or mounting requirements. PLCM01-CDS may serve another function despite a similar connector.
Around PLCM01-NEC, compare PLCM05-CDS (CODESYS control option), PLCM01-NE (CAN option with restricted expansion/stacking) and PLCM02-CDS (KNX / EIB + CODESYS option). Check each complete code and connection on its own page.
PDF manuals
Documents include EXOR 2015 archive catalogue. For PLCM01-NEC, match CAN + CODESYS option with restricted expansion/stacking details against eTOP500 / 600 Options PDF Manuals.