PLCM02-CDS

PLCM02-CDS belongs to eTOP500 / 600 Options and serves as KNX / EIB + CODESYS option. Its role depends on the host-panel generation and the connection actually used in the cabinet.

For PLCM02-CDS, check KNX / EIB + CODESYS option against the exact host-panel configuration. Match its complete code, port and option slot to that installation.

What matters on the installed machine?

PLCM02-CDS serves as KNX / EIB + CODESYS option. Check the actual connector or mounting position and the host-panel generation before selecting it.

Compare PLCM02-CDS (KNX / EIB + CODESYS option) with PLCM01-CDS (CAN module + CODESYS option); similar connectors do not establish the same duty. Test the function after installation on the running system.

Before changing PLCM02-CDS, record its connector position and the function it provides to the host panel. Test that function after installation with the original communication or mounting arrangement.

For PLCM02-CDS, confirm that the host supports KNX / EIB + CODESYS option. Match the part code with the host’s option or mounting requirements. PLCM01-CDS may serve another function despite a similar connector.

Around PLCM02-CDS, compare PLCM05-CDS (CODESYS control option), PLCM01-NE (CAN option with restricted expansion/stacking) and PLCM01-NEC (CAN + CODESYS option with restricted expansion/stacking). Check each complete code and connection on its own page.

PDF manuals

Documents include EXOR 2015 archive catalogue. For PLCM02-CDS, match KNX / EIB + CODESYS option details against eTOP500 / 600 Options PDF Manuals.