6ES7 153-2BA82-0XB0
Siemens 6ES7 153-2BA82-0XB0 – ET 200M IM 153-2 HF PROFIBUS Interface Module
Siemens 6ES7 153-2BA82-0XB0 is the extended-environment version of the IM 153-2 HF interface module for ET 200M within the SIMATIC ET 200 family. It connects a distributed I/O station to PROFIBUS DP. HF stands for High Feature, identifying interface capabilities used in applications such as redundancy and signal timestamping.
Role within an ET 200M station
The IM 153-2 HF transfers data between suitable S7-300 modules and the supervising control system. It does not execute a CPU user program; control logic runs in the connected PLC. For example, a remote pumping station can collect field signals in a local cabinet while exchanging operating commands and status information with central control.
Check the complete order numbers of digital input modules, digital output modules and other I/O components for ET 200M compatibility. The shared ET 200 family name does not establish interchangeability between different system variants.
BA82 version and environmental conditions
The published operating temperature range is −25 to +60 °C, and the protection rating is IP20. Siemens’ Outdoor designation does not remove the requirement for a suitable cabinet or enclosure.
For a station operating in a cold environment, the interface temperature rating is only one part of the selection. I/O modules, active bus components, power supplies and connectors must also suit the intended conditions. Assess mounting orientation and internal cabinet temperature for the complete assembly.
Communication and I/O capacity
PROFIBUS uses an RS-485 interface with a 9-pin D-sub socket, supporting rates up to 12 Mbit/s. Station addressing capacity is 244 input bytes and 244 output bytes.
The interface supports up to 12 suitable S7-300 modules, including support for 64-channel digital modules. Confirm the selected module’s compatibility with the project and installed versions. Physical module capacity, address space and the number of timestamped channels are separate limits.
When extending a station, calculate the additional data requirement alongside the number of available module positions. On the network side, consider cable length, termination and the selected transmission rate together. Our industrial communication section provides background on these network concepts.
Redundancy and the active backplane
A redundant ET 200M arrangement requires two suitable IM 153-2 interfaces, compatible active bus modules and an appropriately configured control system. Installations intended for extended environmental conditions also require bus components rated for those conditions.
Include connection and bus modules in the spare-parts review. Installing one HF interface does not automatically make a station redundant. If module replacement during operation is required, verify that the existing backplane arrangement and configuration support it.
Timestamping and event sequence analysis
The IM 153-2 HF can timestamp transitions from suitable digital inputs. Capacity is up to 128 signals per station and 32 digital inputs per slot. Under the required conditions, the data sheet specifies 1 ms accuracy with up to eight modules and 10 ms with up to twelve modules.
This function can help establish the order of field events during a shutdown investigation. For example, it may help identify which monitoring signal changed first and which equipment stopped afterwards. Accuracy also depends on time synchronization, input-module characteristics and sensor response.
Isochronous operation likewise requires a suitable master, I/O modules and configuration. PROFIBUS cycle time and timestamp accuracy describe different aspects of system behaviour.
DP/PA Link and HART applications
The 6ES7 153-2BA82-0XB0 can also form part of a DP/PA Link with suitable DP/PA couplers and bus components. In this arrangement, the IM 153-2 interfaces the upper-level PROFIBUS DP system with the PA coupler assembly. PA field devices do not connect directly to its D-sub socket.
Its feature set includes extended support for HART auxiliary-variable data and Slave Initiative for Drive ES and Switch ES. HART field connections must be considered through the appropriate HART I/O module; the IM 153-2 itself has no direct HART measurement input.
Power supply and dimensions
Rated supply is 24 V DC, with a permissible range of 20.4–28.8 V DC and maximum current consumption of 650 mA. Backplane supply capability is 5 V DC at up to 1.5 A. Housing dimensions are 40 × 125 × 117 mm, in width × height × depth order.
When sizing the power supply, distinguish between the interface, I/O electronics and field-load supply paths. Select the DIN rail power supply for the complete arrangement rather than the interface rating alone. In a redundant system, power distribution should also support the intended level of availability.
Engineering and replacement checks
Before replacement, record the complete order number, hardware and firmware versions, PROFIBUS address, module sequence and single or redundant operating arrangement. The hardware catalogue entry or GSD file must match the installed station. When comparing similar BA02, BA81 and BA82 order numbers, review environmental requirements and version compatibility separately.
If an HMI panel or SCADA system reports station loss, check the power supply, PROFIBUS connection and project match together. Record diagnostic information before changing settings so that the original fault remains easier to investigate.
Manuals and related topics
For installation and configuration details, consult the ET 200M documents available through our Siemens ET 200 manuals and PDF documentation page. A DP/PA Link application also requires the relevant coupler and link documentation.
Related topics: About Siemens ET 200 | PROFIBUS FAQ | What is PROFINET?
Editor’s note: BA82 selection depends on environmental requirements, the installed backplane and the redundancy arrangement. A clear label photograph and an overall station photograph provide more useful replacement information than the model name alone.
Navigation: Siemens products | Siemens S7 PLC | SIMATIC S7 | ET 200 products