6ES7 193-4CK20-0AA0

Siemens Main Menu  |  SIMATIC S7  |  Siemens ET 200  |  PDF Manuals

6ES7 193-4CK20-0AA0 — Siemens ET 200S TM-P30S44-A0 Terminal Module

Series: SIMATIC ET 200S
Product type: Screw-terminal base for PM-E F power modules
Order number: 6ES7193-4CK20-0AA0

6ES7 193-4CK20-0AA0 is the TM-P30S44-A0 terminal module for ET 200S stations in the Siemens ET 200 distributed I/O family. It carries the PM-E F power module and provides the field connections. When selecting ET 200 terminal blocks, check the TM-P designation, screw connections and A0 potential arrangement together.

Compatible power modules

The Siemens 2013 fail-safe modules manual lists this base for PM-E F pm DC24V PROFIsafe — 6ES7138-4CF03-0AB0 and PM-E F pp DC24V PROFIsafe — 6ES7138-4CF42-0AB0. Since ET 200 power supply modules and their terminal bases are separate components, check the full order number of the installed PM-E F before ordering.

The base does not perform a safety shutdown on its own. The safety function depends on the appropriate power module and system configuration. Consider ET 200 safety modules together with the PROFIsafe safety communication architecture; using this base alone does not establish a SIL or PL rating.

Technical details and AUX1 arrangement

Terminal type: TM-P30S44-A0, screw terminals.
Width: 30 mm.
Dimensions: 30 × 132 × 43 mm (width × height × depth).
Approximate weight: 116 g.
AUX1 access: Through terminals A4 and A8.

The base provides the infeed for a new potential group extending to the next TM-P terminal module. Its AUX1 bus is electrically interrupted towards the adjacent potential group on the left. Preserve this separation when planning the ET 200 power distribution arrangement; do not assume AUX1 continues automatically from the neighbouring base.

Selection and replacement checks

1. Confirm the ET 200S family. Within the ET 200 system architecture, ET 200S, ET 200SP and ET 200iSP are separate hardware families. Similar width or appearance does not establish interchangeability.

2. Distinguish screw and spring versions. 6ES7193-4CK20-0AA0 is the screw-terminal TM-P30S44-A0; 6ES7193-4CK30-0AA0 is the spring-terminal TM-P30C44-A0. When comparing ET 200 connection modules, verify the complete order number, terminal technology and wire preparation requirements.

3. Use the diagram for the fitted PM-E F. Do not assume the “pm” and “pp” versions have identical wiring. Check terminal assignments, load limits and any parallel-terminal requirements in the relevant module manual. Do not introduce undocumented bridges during replacement.

4. Confirm what is included. For a used unit, establish whether the PM-E F electronics are included with the base. Inspect screws, contacts, locks and housing, and identify any missing ET 200 additional modules and accessories.

Editor’s note

Maintaining the intended potential-group separation matters as much as the purchase price. If the base has added bridges, heat damage or loose terminals, a “working” description is insufficient. After replacement, verify the safety function under the plant’s validation procedure. Use the Otomasyon AVM Siemens product enquiry page to provide the base number, PM-E F label and clear wiring photographs.

PDF manuals and technical documentation

Use the ET 200S documents available through the Siemens ET 200 PDF manuals page. A5E01120034-01 Terminal Modules, section 1.5 describes the base and AUX1 arrangement; A5E00103686-08 Fail-Safe Modules covers PM-E F wiring and operating requirements.