6ES7 132-4BB31-0AA0
Siemens main menu › Siemens S7 family › ET 200 › Digital output modules
6ES7 132-4BB31-0AA0 — Siemens ET 200S 2 DO, 24 V DC / 2 A Standard Digital Output Module
6ES7 132-4BB31-0AA0 is the ET 200S 2DO DC24V/2A ST electronic output module in the Siemens SIMATIC product family. It provides two digital outputs for suitable 24 V DC valves, contactors and indicator lamps in ET 200S distributed I/O stations.
Five checks before selection
1. Standard versus High Feature: The 0AA0 suffix identifies the Standard (ST) version; 0AB0 identifies High Feature (HF). When comparing ET 200 digital output modules, do not select solely by the “24 V / 2 A” rating. The HF model’s wire-break and short-circuit diagnostics must not be attributed to this ST version.
2. Load current and supply: Nominal output current is 2 A per channel, with a maximum module total of 4 A. Paralleling outputs to increase current capacity is not permitted. Check the ET 200S power module capacity, other loads in the group and the potential distribution arrangement together. Include coil pickup current in the assessment.
3. Terminal base: Compatible ET 200S terminal bases include screw-type TM-E15S24-01 / 6ES7193-4CB20-0AA0 and spring-type TM-E15C24-01 / 6ES7193-4CB30-0AA0. The field wiring and connection diagram assigns outputs to 1/5, L+ to 2/6 and M to 3/7. Compare connection type and terminal availability before replacing the base.
4. Low-current loads: The specified minimum ON-state current is 7 mA; maximum OFF-state residual current is 0.5 mA. Check the receiving device’s thresholds, particularly with electronic relays or digital input connections. A voltage reading alone does not prove that the output operates correctly under load.
5. Protection and troubleshooting: Short-circuit protection is provided, but the module has no diagnostic function. Green LEDs show channel status. An output command observed through the ET 200 communication interface is not confirmation that the actuator has operated. Inspect the supply, common M connection, wiring and load together when investigating a fault.
Editor’s note
Siemens notes that applying the power module’s 24 V supply through a mechanical contact can, depending on the circuit, produce an approximately 50 µs HIGH pulse at the outputs. Account for this when connecting to high-speed counter inputs and include power-up counting behaviour in the test plan.
PDF and technical documentation
Visit the Siemens ET 200 PDF and user manual library. The dedicated manual is 2DO DC24V/2A ST — A5E01077237-01. Connections and terminal bases are covered on pages 7–8, technical data on pages 9–10 and LED indications on page 11. The catalogue’s five units per pack refers to packaging; each module has two outputs.
Related topics
Terminal bases • Connection modules • Digital inputs • Digital outputs • Power distribution • Additional modules
Otomasyon AVM • Siemens guide
Siemens main menu | Siemens S7 family | ET 200 module categories | ET 200 PDF archive