6ES7 151-7FA00-0AB0

Siemens 6ES7 151-7FA00-0AB0 – ET 200S IM 151-7 F-CPU

6ES7 151-7FA00-0AB0 is the IM 151-7 F-CPU for the Siemens SIMATIC ET 200S system. Its order number without spaces is 6ES7151-7FA00-0AB0. Within the ET 200 family, this device provides a fail-safe CPU capable of executing a local control program and a safety program.

The IM 151-7 F-CPU brings PLC functionality to an ET 200S station. With the appropriate configuration, it can operate as an independent controller or as an intelligent DP slave / I-slave connected to a higher-level controller. Local program execution and data exchange with the supervisory system are configured separately in the project.

PROFIBUS and safety communication

This model uses PROFIBUS DP for its network connection. Match the PROFIBUS address, transfer areas and master/slave configuration to the existing project. Safety applications additionally require appropriate PROFIsafe and F-system parameters; establishing communication alone does not validate a safety function.

The F-CPU operates with suitable fail-safe modules and a correctly implemented safety program. The achievable safety level depends on the CPU, F-I/O, sensors, actuators, wiring and application validation. Functional modules and standard I/O do not become fail-safe modules simply because they are connected to an F-CPU.

STEP 7 and S7 Distributed Safety

Siemens’ software requirements table covering this order number specifies STEP 7 V5.2 and S7 Distributed Safety V5.2 as the starting versions. These are historical minimum requirements for the device; the engineering computer, operating system, service packs and F ConfigurationPack require a separate compatibility check. Treat the standard program and safety program together with their respective engineering and acceptance procedures.

Specific compatibility example: Siemens requires firmware V2.0.6 or later when using the PM-E F pp DC24V PROFIsafe – 6ES7138-4CF40-0AB0 with this IM 151-7 F-CPU generation. For the 4 F-DI/3 F-DO – 6ES7138-4FC00-0AB0, the CPU compatibility entry instead specifies 6ES7151-7FA20-0AB0 with V2.6. That entry must not be treated as approval for the 7FA00 version.

Memory card and ET 200S station arrangement

This CPU family uses a SIMATIC Micro Memory Card – MMC. Siemens’ card compatibility list specifies SIMATIC MMC capacities up to 8 MB for 6ES7151-7FA00-0AB0. Memory card capacity is not the same as CPU work memory capacity. Check card selection and program transfer against the existing project and device version.

Local digital input, digital output and analog input modules must suit the ET 200S system. Terminal blocks, power supply modules and connection components also form part of the station configuration. ET 200SP or ET 200iSP components are not automatically suitable simply because they share the ET 200 family name.

Maintenance and replacement

Before replacement, compare the complete order number, hardware revision, firmware, MMC contents and project backup. Examine the CPU diagnostic buffer together with the standard and safety program status. A CPU reaching RUN does not, by itself, demonstrate that the complete safety chain works correctly. After replacement, complete the application’s required safety function tests and acceptance records.

Editor’s note: This is an ET 200S module with an integrated CPU. Do not assume that the 6ES7151-7FA00-0AB0, 7FA01 and 7FA20 versions have identical memory, firmware or module compatibility. This model’s PROFIBUS configuration must also be distinguished from IM 151-8F PN/DP models with PROFINET interfaces.

User manuals and PDF documentation

For IM 151-7 F-CPU, ET 200S and S7 Distributed Safety documentation, visit the Siemens ET 200 user manuals and PDF documentation page. Confirm that the selected document covers 6ES7151-7FA00-0AB0 and the firmware version in use.

Related topics

ET 200 PROFIBUS and PROFINET interfaces · Other network interface modules · Power distribution modules. Assess compatibility within these categories using the specific ET 200 system and complete product code.

Navigation: Siemens automation · SIMATIC S7 · About ET 200.

Technical sources: Siemens, S7 Distributed Safety – Configuring and Programming product information (A5E00169432-02); ET 200S – Fail-Safe Modules (A5E00103686-04); S7 F ConfigurationPack V5.5 SP13 (incl. Upd1) release notes; SIMATIC MMC compatibility information (Siemens entry 35000903).