The DGZ-44R-A advanced functional timer is a model that can be used for general time-based applications with its many different operating programs. It has the ability to generate its own DC voltage, allowing for sensor usage (which can be seen in the product visuals). It has 3 separate digital inputs, consisting of start, reset, and gate (pause). The device comes with one standard NC+NO relay output and one SSR output. There are 13 different mode selection options, allowing for response to all known timing applications. It has a 2-line 4-character 7 segment display that can show both the set value and remaining time simultaneously.

- Size provided information is technical specifications of a timer device.
- The device has a size of 48x48mm and can be mounted on a panel with a size of 45.5x45.5mm.
- It has a 2x4 digit 7 segment display and 3 digital inputs for START/RESET/GATE functions.
- The GATE input stops the timer when activated.
- The device has 1 relay output (normally open, normally closed, and common) with a rating of 250VAC and 2A resistive load, and 1 open collector solid-state relay output with a rating of 30V and 100mA maximum.
- The timer can be set for up to 99 hours and 59 minutes, with a sensitivity of 1 minute or 1/10 of a second.
- The device has 13 different output functions to choose from.
- The timer can provide power (12VDC, 50mA maximum) for a sensor, and the device can produce its own DC voltage for this purpose.
- The device can be powered by 100-240VAC 50-60Hz or 24VAC/DC (optional) power supply.
- The device has a power consumption of less than 6VA and weighs less than 0.5 kg. It has a CE certificate.
- It has a micro switch button and a maximum clamping torque of 0.5 N.m for its terminal connections.
- The device meets EN 61010-1 for safety standards for pollution degree 1 and measurement category I, and has an IP20 protection rating according to EN 60529 standards.
- The device can operate in a temperature range of 0-50°C and can be stored in a temperature range of -10°C to 60°C without freezing.
- The device meets the EMC standards of EN 61000-6-1 and EN 61000-6-3 for a light industrial environment.

++ DGZ 44 RA user manual >

+ Timer relays home page >

+ Economical model timer relays >

+ Customizable timer relays >

+ Timer relay prices >

+ Control devices home page >

Editor's note: Dear members, DGZ type time relays are in the "advanced" category of relay devices. They can respond to general-purpose time relay applications (delay on pull, delay on release, start-stop button operation, latching or momentary triggering, flasher operation types, etc.). They are very easy to use, and with their 2-row display, you can see both the set time and the counted active time simultaneously. It can work collectively with inductive, capacitive or photoelectric sensors as it produces its own DC supply. There is also an SSR output for use in places where extremely short work is required. It is a headache-free and long-lasting model that can be easily preferred. (Personal opinion)

Please note!! ALL installation procedures of DERELL DEZ series electronic indicators MUST be carried out ONLY by expert technical personnel. Installation must always be carried out in compliance with the relevant ministry laws or regulations in force (2006/42/EC). Otomasyon AVM does not accept any responsibility whatsoever for installations and individuals that violate local laws and/or other regulations (for foreign sales). If the instructions provided by DERELL Electronics are not followed, problems that fall outside the scope of the warranty may occur in the device. Detailed information on this topic is provided in the user manual. For detailed information, please contact support@otomasyonavm.com.