Delta UC-MS020-01A

Delta UC-MS020-01A

Delta UC-MS020-01A is a 2-metre RS-232 programming and serial communication cable with an 8-pin male Mini-DIN connector and a female DB9 connector. The manufacturer lists it for connecting a suitable DVP PLC RS-232 port to a computer. Check the 01A suffix and female DB9 end together.

PLC and computer connection

The computer needs a suitable RS-232 serial port. A USB-only computer requires a separately evaluated USB-to-RS-232 converter; UC-MS020-01A does not itself provide a USB interface. The COM number and driver depend on the computer's serial hardware.

Identify the main family under Delta DVP PLC series. For machines using Delta DVP-ES2 or Delta DVP-EH3, check the complete CPU code, selected COM port and RS-232 pin assignments against the device manual. Different ports within the same series are not automatically equivalent.

Figure 2 pin connections

The manufacturer's drawing specifies Mini-DIN pin 4 Rx ↔ DB9 pin 3 Tx, Mini-DIN pin 5 Tx ↔ DB9 pin 2 Rx, and Mini-DIN pin 8 GND ↔ DB9 pin 5 GND. The DB9 side also shows links between 7–8 and 1–4–6.

Use the connector orientation shown in the manual. Viewing the female DB9 from the rear can reverse the apparent pin order. When rebuilding a cable, follow verified end-to-end connections rather than conductor colours. The PLC still requires its specified power supply.

Differences from similar codes

Delta UC-MS030-01A is the 3-metre option in the same connection family. Delta UC-MS010-02A is listed as 1 metre with a 90° Mini-DIN connector. Available space and cable exit direction matter alongside length.

Delta UC-MS020-06A is 2 metres and Delta UC-MS030-06A is 3 metres; both have a male DB9 end. Do not treat 01A and 06A models as cables differing only in length.

Review Delta UC-PRG020-12A for serial access from a computer's USB side. Compare other interface options under Delta DVP interfaces. An adapter that makes the connectors fit does not by itself establish correct electrical wiring.

Software and serial settings

No firmware or PLC project is downloaded to UC-MS020-01A itself. Select Delta WPLSoft or Delta ISPSoft according to CPU support; review tools under Delta PLC software. Choose the correct COM port, speed, parity, data bits and stop bits in the application.

For HMI/TP connections, separately verify the panel's port and project driver. Review the panel under Delta HMI files, and backup or PC connection options under Delta HMI programming and HMC cables. A connection arrangement suitable for a computer is not automatically valid for every panel.

Layout and connection checks

Include connector projection, cable turns and maintenance access when assessing the 2-metre length. Do not force Mini-DIN pins. Use DB9 retaining screws and cable support to reduce strain on the socket, and prevent cabinet covers from trapping the cable.

Start document selection at Delta PLC accessories files. Figure 2 in the PLC/HMI Cable Selection Guide appears on printed page 1-80 / PDF page 89. Printed page 48 / PDF page 49 of the 2023 DVP/TP catalogue confirms the 2-metre PLC-to-PC description.

Editor's Note

First check that the DB9 end is female. Cable colour or a generic “Delta cable” description is insufficient. Record the Mini-DIN end, complete label and length together.

Recheck the COM number when using a USB converter. Moving to another USB socket or changing adapters can change the serial port selected by the application. Verify this before condemning the cable.

Back up the existing program before making changes. Communication testing does not require deleting a working PLC project or changing random parameters. Check connections, port selection and serial format in order.

Test continuity with both ends disconnected from equipment. Compare the three data connections and DB9 links with Figure 2. Readings that change when the cable is gently moved near a connector may reveal a broken conductor.

Complete the check with the actual CPU and software. Start with device identification or reading a known value. Connector fit or a continuity beep alone does not confirm a working connection.

Related topics

Browse parent groups under Delta DVP communication cables and Delta PLC accessories, and device documents under Delta PLC and HMI manuals and Delta manuals.

External references: Delta PLC/HMI Cable Selection Guide — 2019, English · Delta DVP/TP manufacturer catalogue — 2023, English.