Delta AHCPU531-EN
Delta AHCPU531-EN advanced PLC CPU with Ethernet
The Delta AHCPU531-EN is an advanced Ethernet CPU for the Delta AH500 PLC series. It supports 384K program steps, 4,096 function blocks and up to 4,352 local digital I/O points. A suitable configuration supports one main backplane and up to seven extension backplanes.
Ethernet and serial communications
The CPU has one 10/100 Mbps Ethernet port, one multimode RS-232/RS-422/RS-485 serial port, a Mini USB programming port and an SD card slot. Ethernet supports Modbus TCP client and server and EtherNet/IP Scanner and Adapter roles. The serial port supports Modbus RTU or ASCII. See the guides to Modbus and RS-485 and Modbus RTU for related information.
The AHCPU531-EN and AHCPU531-RS2 differ in their port layout. Both CPUs have the same program capacity and local I/O limit. The AHCPU531-RS2 has two serial ports. The AHCPU531-EN has one serial port and one Ethernet port. If an existing panel uses two serial lines, check how both will connect in the new configuration before replacing the CPU.
ISPSoft and backplane configuration
Program the CPU in Delta ISPSoft. Select the Mini USB or Ethernet connection in COMMGR. In ISPSoft, use HWCONFIG to check the CPU type, module order and I/O start addresses. See Delta PLC programming cables and Delta PLC software for connection options.
For rack and power supply selection, see AH power supplies and Delta PLC accessories. Select AH digital I/O, AH analog I/O and AH communication modules to match the field signals and networks.
Manual and technical PDF
AHCPU531-EN specifications (PDF, English) · Section 2.2.2 of the AH500 Hardware and Operation Manual. PDF pages 42–43 cover CPU capacity, backplane limits and port specifications.
Editor’s Note
When buying a used CPU, ask for a photo of the full label. Check the AHCPU531-EN code and the front Ethernet socket.
Before removing the old CPU, back up the ISPSoft project, rack layout and I/O start addresses.
Record the IP address, serial settings and EtherNet/IP device assignments separately. They are useful when restoring HMI and drive communications.
On the bench, test Mini USB and Ethernet separately. Check the RUN, ERROR and BUS FAULT indicators as well.
If the Ethernet link is up but the HMI receives no data, check the protocol role and project address mapping first.
Related models and topics
AHCPU530-EN 256K-step Ethernet CPU · AHCPU521-EN 192K-step Ethernet CPU · AHCPU560-EN2 redundant CPU.
For a separate PLC platform, see Derell B Series PLCs.
Delta AH PLC series · AH expansion modules · Delta PLC · Delta Automation
External reference · Delta EtherNet/IP Operation Manual · Section 3.2.1 covers the AHCPU5x1-EN family.