Delta AHBP03M2-5A

Delta AHBP03M2-5A

Delta AHBP03M2-5A is an AH Motion main backplane with three I/O slots. It provides the common mounting and connection base for an AHxxEMC-5A motion controller, a suitable power supply and supported AH modules. The power-supply and motion-controller positions are additional to the three specified I/O slots.

M2 backplane and motion-controller selection

The manufacturer lists M2 main backplanes for AHxxEMC-5A motion controllers. Assess AH10EMC-5A and AH20EMC-5A within the Delta AH motion controllers group in that context. Standard AH CPU or RTU modules should not be treated as suitable for the M2 controller position.

Preserve this distinction when selecting within the Delta AH PLC series. The backplane forms part of the module connection and power-distribution arrangement; the installed motion controller executes the motion program and axis control. Similar AHBP ordering codes alone do not establish interchangeability.

Planning the three I/O slots

Three slots mean three physical module positions. Channel count depends on the installed modules. For AH digital modules, AH analog modules, AH temperature / motion modules and AH communication modules within Delta AH expansion modules, verify that the exact model is on the AH Motion supported-module list.

Record module order, signal type and field power in the project documentation. A module working in another AH system is not automatically suitable because it shares the family name. Check supported hardware and revision together with the actual motion controller.

Power supply and serial connection

The supply occupies its dedicated backplane position. Delta AHPS05-5A accepts 100–240 V AC, while Delta AHPS15-5A accepts 24 V DC. Use the Delta AH power supplies group to assess input power and total module consumption together.

The backplane provides a built-in serial communication connection. Verify the cable, terminal functions and communication settings against the relevant controller documentation. Distinguish the CPU's network ports from the backplane's serial connection.

Dimensions and larger M2 backplanes

The manufacturer's dimension table specifies 257 mm width and 110 mm height for AHBP03M2-5A. Check mounting holes, installed-module depth and cable-turning space separately. Bare-backplane dimensions do not describe the complete system's space requirement.

Delta AHBP05M2-5A provides five I/O slots, and Delta AHBP07M2-5A provides seven I/O slots. Review cabinet space, power budget and project configuration before moving to a larger base. Preserve the functional distinction between an M2 main backplane and E1/ER1 extension backplanes.

ISPSoft hardware configuration

The rack selected in HWCONFIG within Delta ISPSoft must match the physical AHBP03M2-5A. The manufacturer's example changes an initial five-slot rack to the three-slot arrangement using Replace → AHBP03M2-5A. Compare software module order with the actual installation and back up the project before making changes.

PDF and selection documentation

Start document selection at Delta PLC accessories files. In the 2024 AH catalogue, printed page 21 / PDF page 22 gives dimensions, and printed page 37 / PDF page 38 identifies M2 models and slot counts. Section 4.4.1 of the AH Motion Controller Operation Manual explains selection of the three-slot rack in the software.

Editor's Note

Read the M2 suffix together with the controller code first. Photograph the backplane, supply and controller in one record. Keep the supply and motion-controller positions separate when counting the three I/O slots.

Mark module order before dismantling. Record every module code and position, and retain a project backup. Reassembling the same modules in a different order can change addressing and application behaviour.

Inspect connectors and mechanical retainers with power disconnected. Look for bent contacts, cracked housings and loose modules. Do not force connectors into place or try to correct misalignment by applying pressure.

Distinguish a single-position fault from loss of the whole rack. For one missing module, inspect that module and slot; if the whole system is affected, check power and main connections too. Use measurements before condemning the backplane or CPU.

Test each I/O group systematically after replacement. Verify hardware configuration, input responses and that outputs reach their intended field devices. A lit RUN indicator alone does not complete machine testing.

Related topics

Browse parent groups under Delta AH Motion backplanes and Delta PLC accessories, and device documentation under Delta PLC and HMI manuals.

External references: Delta AH manufacturer catalogue — 2024, English · Delta AH Motion Controller Operation Manual — English.