Digital Potentiometers 48-48
Hello,
Our electronic potentiometers for speed control devices (VFD) in the size of 48mm X 48mm are listed below.
You
can control your inverter digitally. With these types of devices that
can be mounted on the control panel, you can not only control the speed
of your machine, but also set the calibration of the device to display
the desired value (rpm, kg, etc.). Additionally, you can control the start and stop ramps of your speed controller.
These devices cannot be used as a "regulated power supply." However, they can be used as a signal source for testing equipment or similar signal generators, with 0-10V and 4-20mA options.
Note 2 that these devices digitally adjust and display the speed of the inverter and are not independent speed indicator devices.
If you want to see the speed, frequency, and actual current of your driver, please see the digital indicators.
We have prepared videos and other documents about our digital potentiometers.
Each model has its own page, which details "power supply voltages", "output types", "input types", and "oprating modes", as well as including user manuals.
Note 3: Our electric potentiometers, like all products on our website, are designed for use in machines in the industrial automation sector. They are produced with galvanic isolation to address potential sources of interference such as frequency controllers, power supplies, and large and small induction motors in the same environment.
Your shopping cart is empty!