Sayport VFD 30 kw , 380v supply power

Input Nominal Voltage Range ;
3-Phase 400V±15%; single phase ones 380 V±15%
Rated frequency ; 50/60Hz
Output Nominal Voltage Range ; 3-Phase 0～400V; 3-Phase 0～230V
Frequency range ; 0.50～650.0Hz
Carrier frequency ; 2000~10000Hz; Fixed carrier wave (PWM) and random carrier wave are selected by F159.
Input Frequency resolution; Digital tuning: 0.01Hz,

Analog tuning: maximum Frequency
Control mode ; VV - VF Control


Overload capacity ; 150% rated current, 60 seconds.
Torque increase ; Includes Auto torque boost, Manual torque boost, 1-16 curves.
V/F Curve ; There are 3 modes: straight line type, square type and defined V/F curve.
Start mode ; Direct start, Speed ​​tracked start.
DC Braking ; DC braking Frequency: 0.2-5.00 Hz, Braking time: 0.00~10.00s
Jogging control ; Jogging (slow run) (slow run) frequency range: minimum frequency ~ maximum Frequency, Jogging (slow run) Acceleration/deceleration Time: 0.1~3000.0s
Auto Circulation Management and Multi-stage cruise control;
0to circulation operation or terminal control has 15 different operating speeds.
Internal PID settings; Closed loop control operation easy swing PID system
Automatic current regulation (AVR); When the source voltage changes, the Modulation value can be adjusted automatically.

Operation Functions:
Frequency settings; Voltmeter or external analog signal (0～5V, 0～10V, 0～20mA); Keypad (terminal)▲／▼ keys, external control logic and automatic circulation settings.
Start/Stop Control ; Terminal control, Keypad control or communication control.
Channel Command operation (Management) 3 kinds of channels from keypad panel, Control terminal and serial communication port.
Frequency source: Digital number, analog voltage, analog current and serial communication port.
Additional Frequency Source: 5 different additional frequency fine tuning and frequency component application.
Optional :
Built-in EMI Filter, Built-in Braking unit, Modbus communication, tele-Control panel

 Not efficient for solar applications. Click for our MPPT solar controlled inverters.

Protection Function:
Input Out-Phase, Output Out-Phase, Input Under-voltage, DC Over-voltage, overvoltage, inverter overload, motor overload, current stall, overheat, external faults, underload, pressure control, analog line disconnected .
Indicator :
LED Led Nixie tube showing current output frequency, current rotate-speed (rpm), current output current, current output voltage, current linear speed, fault types and parameters necessary for the system and its operation; LED indicators showing the current operating status of the drive.

-

+ Sayport VFD F1500 user manual pdf

+ Sayport VFD main page

+ VFD main Page

-------

--