BKDC-46

BKDC-46 is an operator panel identified by its complete hardware code in the UniOP BK family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.

Match the supply, port layout and cabinet cut-out of BKDC-46 against its nameplate and technical drawing. Compare connector orientation and mounting dimensions with the installed panel.

UniOP BK is a legacy graphic and keypad-panel family. Display technology and the T suffix do not imply the same configuration; use the device nameplate and applicable manual. Use the complete BKDC-46 code when selecting within this family.

What matters on the installed machine?

The display arrangement of BKDC-46 must be checked on the installed nameplate and front panel. Compare BKDC-16 before deciding on a substitute. Matching a plug does not preserve the operator’s screen and key layout.

For BKDC-46, verify the Designer / Designer 6 release, protocol option and whether the archived project opens. A related code such as BKDC-16 does not establish the same software target.

Record the current display behavior before changing BKDC-46. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.

Around BKDC-46, compare BKDC-16T, BKDL-16 and BKDL-16T. Check each complete code and connection on its own page.

PDF manuals

Documents include UniOP Installation Guide v1.08, UniOP OEM installation guide. For BKDC-46, match the full code and hardware period against UniOP BK PDF Manuals.