BKDL-16
BKDL-16 is an operator panel identified by its complete hardware code in the UniOP BK family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.
Match the supply, port layout and cabinet cut-out of BKDL-16 against its nameplate and technical drawing. Compare connector orientation and mounting dimensions with the installed panel.
UniOP BK is a legacy graphic and keypad-panel family. Display technology and the T suffix do not imply the same configuration; use the device nameplate and applicable manual. Use the complete BKDL-16 code when selecting within this family.
What matters on the installed machine?
The display arrangement of BKDL-16 must be checked on the installed nameplate and front panel. Compare BKDC-16 before deciding on a substitute. Matching a plug does not preserve the operator’s screen and key layout.
For BKDL-16, verify the Designer / Designer 6 release, protocol option and whether the archived project opens. A related code such as BKDC-16 does not establish the same software target.
Record the current display behavior before changing BKDL-16. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.
Around BKDL-16, compare BKDC-16T, BKDL-16T and BKDR-16. Check each complete code and connection on its own page.
PDF manuals
Documents include UniOP Installation Guide v1.08, UniOP OEM installation guide. For BKDL-16, match the full code and hardware period against UniOP BK PDF Manuals.