Which sources are considered renewable energy?

Recognising energy resources that nature replenishes

Solar, wind, natural hydropower, geothermal, biomass and ocean energy belong to the renewable resource family. Their energy comes from flows or materials that nature replenishes on human timescales or continually supplies. That is the defining idea behind renewable energy. It does not mean unlimited power is available in every location or at every moment.

The main resources at a glance

Resource Energy available Typical uses
Solar Solar radiation Photovoltaic electricity, water heating, process heat and concentrating solar systems
Wind Kinetic energy in moving air Mechanical power or electricity from turbines
Hydropower Flow and elevation differences replenished by the natural water cycle Turbines supplied by rivers or reservoirs
Geothermal Earth's internal heat Heating and electricity where resource temperatures are suitable
Biomass Chemical energy in replenishable organic material Heat, biogas, biofuels and electricity
Ocean energy Tides, wave motion and suitable ocean temperature differences Tidal turbines, wave converters or thermal cycles

Waves, tides and ocean heat are distinct resources. Wind can generate surface waves, whereas the gravitational influence of the Moon and Sun helps produce tides. The connection with tidal forces in space explains the latter mechanism. Ocean thermal energy conversion (OTEC) uses the temperature difference between warm surface water and colder deep water. A coast that offers one resource does not necessarily offer the others.

Does renewable always mean solar-derived?

Solar radiation supports atmospheric wind, the water cycle and photosynthesis. Many renewable resources consequently have an indirect solar origin, as explored in the different pathways for using solar energy. Deep geothermal energy instead draws on Earth's internal heat, and tides involve gravitational interactions. Renewable and solar-derived describe different properties.

Why biomass needs a supply-chain assessment

A feedstock's ability to regrow does not prove that its use is sustainable. Wood, agricultural residues and suitable organic wastes can provide biomass energy, but harvesting rates, land-use changes and processing inputs matter. Biotechnology for improving biomass production may improve feedstock yields or conversion; it cannot replace sustainable resource management. Burning biomass produces emissions. Its environmental performance must be assessed across the production and use chain.

Waste-to-energy is not automatically renewable

The composition of the waste determines the distinction. Food waste, paper and wood are biogenic materials. Petroleum-derived plastics have a different origin. An installation using mixed waste therefore needs to distinguish its biogenic and fossil-derived energy fractions. Calling a material waste does not make all of its energy renewable.

Separate resources from carriers and storage equipment

Electricity is an energy form and carrier. It can be generated from renewable resources or from coal and other nonrenewable inputs. An electrically powered device does not, by that description alone, establish the origin of its energy. Manufactured hydrogen is also an energy carrier. Renewable energy can be used in its production, but the name hydrogen does not identify the production pathway.

A battery stores energy; its supply history depends on how it was charged. Energy storage technologies shift energy between production and demand periods. Likewise, pumped-storage hydropower uses previously generated electricity to raise water before recovering some of that energy. Storage is not an additional primary energy resource. Losses prevent the full input energy from being returned.

Where do fossil fuels and nuclear fission fit?

Coal, petroleum and fossil natural gas are not replenished at the rate they are consumed on human timescales. They are therefore nonrenewable. Uranium-fuelled nuclear fission is also generally classified as nonrenewable. Low carbon emissions and resource renewability are different criteria. Comparisons of the advantages of renewable sources need to preserve that distinction.

Renewability does not describe the entire operating profile

Resource replenishment and continuous generation are separate characteristics. Solar output follows available radiation, wind output follows wind conditions, and hydropower depends on water availability. Biomass plants with fuel stocks and suitable geothermal installations offer different operating possibilities, but still face resource, equipment and maintenance constraints. Grid integration coordinates generation with demand, storage and other facilities. A renewable classification does not guarantee that an individual plant can deliver any requested power at any requested time.

Related questions

Developments in renewable technologies · Economic effects · Energy policies and incentives · The future of renewable energy

Sources: EIA: renewable sources · EIA: ocean thermal energy · IEA: bioenergy sustainability · EIA: waste-to-energy · DOE: the role of hydrogen · DOE: energy storage