ALPHA5
ALPHA5 servo: match the amplifier and motor as a system
ALPHA5 is a Fuji Electric servo family for position, speed and torque control. The amplifier commands the motor, while encoder feedback tells the control system where the axis actually is. The ALPHA5 name alone cannot identify a replacement part. Review the ALPHA5 model codes and ALPHA5 Smart as separate entries.
Motor range and code differences
Fuji’s ALPHA5 motor list covers GYS 200 V motors from 0.05 to 5 kW across the family. That is not the rating of each GYS motor. The full code distinguishes brake and encoder variants. Motors with the same nominal power may still differ in mounting, brake arrangement or feedback connector and cannot be swapped on that number alone.
Working with an older axis
Fuji lists ALPHA5 as discontinued and names the ALPHA7 family as an alternative. This is not a blanket drop-in replacement for every ALPHA5 amplifier–motor pair. Compare the motor plate, amplifier code, encoder, brake supply, cables and control command. Fuji’s ALPHA7 compatibility note is limited to particular GYS5/GYC5/GYG5 motors and power classes.
Look under Fuji servo software for setup tools and servo documents for manual titles. If a PLC commands the axis, verify its motion command and communications against the Fuji PLC section.