- 0.37 kw,380volt, Abb ACS310-03E-02A6-4 ac drive.

Voltage and power connection : 3-phase, 380 … 480 Volt
Frequency: 48 to 63 Hz
Motor types: Asynchoronous induction motors
Output Voltage: 3-phase, from 0 to U supply
Output Frequency: 0 to 500 Hz
Switching frequency: 4, 8, 12 and 16 kHz (derated)
Type of control: Scalar v/f  Linear, squared and user defi nable U/f profiles Energy optimizer
Fieldbus: Modbus RTU EIA-485 and EIA-232Modbus TCP with SREA-01 option  module
Degree of protection: IP20 / Optional NEMA 1 enclosure
Ambient temperature: -10 to 50 ºC (14 to 122 ºF), no frost allowed
Markings: CE and C-Tick approvalsUL, cUL and GOST RRoHS compliant
Directives: Low Voltage Directive 2006/95/EC Machinery Directive 2006/42/EC EMC Directive 2004/108/EC
Harmonics: For reducing THD in partial loads and to comply with EN/IEC 61000-3-12 with external AC input chokes
EMC Class C3 (2nd environment unrestricted distribution) built-in as standard Class C2 and C1 with external optional EMC filters

Options:  Basic and Assistant control panels−  FlashDrop tool for fast cold configuration−  MREL-01 relay output extension module−  SREA-01 Ethernet adapter−  DriveWindow Light 2 PC tool


Pump and fan control (PFC) feature to control pumps and fans in parallelOne drive controls several pumps or fans and eliminates the need for an external programmable logic controller. Reduces motor stress and increases lifetime when auxiliary motors are driven according to the needed pump/fan capacity. Interlock function enables one motor to be disengaged from the mains supply while others continue operating in parallel. Saves cost of additional drives and external PLC. Longer life for pump or fan system while reducing maintenance time and costs.Maintenance can be carried out safely without stopping process.

Soft pump and fan control feature (SPFC) Reduces unwanted pressure peaks in pumps and pipelines when an auxiliary motor is started. Reduces inrush current to the power network while connecting new auxiliary motors. Reduces maintenance costs. Longer life for pump or fan system. Smoother processes.

Pump protection functions Integrated protection and control with pre-programmed features like pipe cleaning, pipefill, inlet/outlet pressure supervision and detection of under or over load for preventive maintenance. Improves process control and system reliability. Integrates system protection.

Smoother processes: improved and optimized system. Longer life for pump and fan system, reduced maintenance costs.Reduces maintenance costs.Longer life and reliable operation of pump system.

PID controllers: Varies the drive’s performance according to the need of the PID application. Enhances production output, stability and accuracy.

On/off cooling fan control: Cooling fan rotates only when the drive is running, thereby cooling only when needed. Silent operation. Improves drive’s energy efficiency.

Software controlled phase inversion: Fast and easy way to change the phase order of the motor rotation. Time savings as there is no need to change the output cable order manually.

Energy optimizer: Improved motor effi ciency with intelligent drive control method, especially while operating on partial centrifugal loads. Boosts energy efficiency due to lower motor currents. Reduces audible noise from the motor.

Energy efficiency counters: Several counters to illustrate saved energy (kWh), carbon-dioxide emissions (CO2) and cost in local currency. Shows direct impact on energy bill and helps control operational expenditure (OPEX).

Load analyzer: Load analyzer saves process data, such as current and torque values, which can be used to analyze the process and dimensioning of the drive and motor. Optimized dimensioning of the drive, motor and process

Drive protection: Motor output and I/O protected against wiring faults. Protection against unstable supply networks. Coated boards as standard. Latest solution to protect the drive and offer trouble free use and the highest quality.

Application macros: Application macros are preprogrammed parameter sets. While starting up the drive, the user typically selects one of the macros that is best suited for the application. The diagram below gives an overview of ACS310 control connections and shows the default I/O connections for the Abb standard macro.

- ACS310-03E-02A6-4 technical data;

−  Abb Standard macro

−  3-wire macro

−  Alternative macro

−  Motor potentiometer

−  Hand/auto macro

−  PID control macro

−  PFC control macro

−  SPFC control macro

Required technical details; 380 - 480 V ± 10%

Input fuse selection; 3 * 10 Amps (3 Phase)

External potentiometer selection; It can be from 2.2k Ohms to 10k Ohms

Braking resistance values; ***

Optional input filter; Drive filter models>

    * This product has 3 phase 380 volt inputs. It has 3 phase output.

- A higher power model (0,75 kw); ACS310-03E-02A6-4-

- A lower power model (0.18 kw); none -

- Dimensions (W*H*L) mm:    

- Abb Main Page -

- Panel speed control devices

- Drivers for solar systems

- Sensor groups

- Basic control devices

- Servo and Step + reducers

For Abb ACS310-03E-02A6-4;

-> Catalog (English pdf)

-> Abb ACS310User manual (English pdf)

-> Quick commissioning and training videos

> SHOW ALL priceS (0.4 KW) -

> Abb price list -

Editor's Note: Abb ACS3100 drives are robust models that have proven themselves for fan ans pump applications and have worked with zero problems for many years. I have not used this model much. However, I found a lot of encounters in hospitals, buildings and shopping malls, which are susceptible to interference.

Attention please !! All installation of ACS310 drives should ONLY be carried out by qualified technical personnel. Installation must always be carried out in accordance with applicable (2006/42 / EC) relevant ministry laws or regulations. Otomasyon AVM does not accept any responsibility for installations and individuals that violate local laws and / or other regulations (for overseas sales). If the instructions given by ABB are not followed, problems may occur with the device that are not covered by the warranty. Detailed information on this subject is given in the user manual. For detailed information, you can contact destek@otomasyonavm.com.