IC697VRM015
IC697VRM015 - Fiber-Optic Reflective Memory with Interrupts
High-speed fiber-optic network: Operates at 170 Mbaud serially, providing a fast, efficient method for data transfer.
Reflective Memory Network: Data written to memory in one node is instantly replicated across all nodes in the network.
Distance & Scalability: Supports up to 2,000 meters between nodes and accommodates up to 256 nodes.
Data Transfer Rates:
Without redundancy: 6.2 Mbyte/s
With redundancy: 3.2 Mbyte/s
Interrupt Capability: Any node can generate an interrupt for another node or all nodes with a single command.
Error Detection: Integrated error management with a redundant transmission mode for additional error suppression.
Zero Processor Overhead: No involvement from the processor in network operation, ensuring efficient performance.
Memory Access: Supports A24:A32:D32:D16 memory access.
VMEbus Board: Single 6U VMEbus board, easy to integrate and manage.
Technical Description:
The IC697VRM015 is a high-performance, multi-drop VME-to-VME network solution that allows for fast data sharing across distributed computer systems via Reflective Memory. Data is stored in a local SRAM and automatically broadcast over a high-speed fiber-optic network to corresponding memory locations on other nodes.
Reflective Memory Highlights:
Data shared across up to 256 nodes, with each node having 256 Kbyte of on-board SRAM.
Data transfers are software transparent, eliminating the need for direct I/O management.
FIFO buffering ensures optimized CPU and bus performance, especially during peak data rates.
Interrupt Management:
Reflective Memory supports the generation of interrupts, which can be used to synchronize system processes. Each node on the network can send and receive interrupts to or from any other node. This is critical for signaling the readiness of data for processing or for marking the completion of previous processes.
Error Management:
Error Detection: Managed through the TAXI chipset and parity checking.
Redundant Transmission: This mode ensures that data transfers are duplicated. If an error is detected in the first transfer, the second one is used. The probability of both transfers having errors is extremely low (1 error every 372,000 years at maximum data rate).
FIFO Management: Designed to prevent data overflow by maintaining careful arbitration between incoming data from the fiber-optic link and data from the VMEbus.
System Configuration:
The Reflective Memory system uses a fiber-optic daisy chain ring, where each transfer circulates the entire network, ensuring reliable data propagation.
Node Identification: Each node is assigned a unique number (0-255) during hardware integration. This can be utilized for assigning specific functions within the system.
Specifications:
Memory Size: 256 Kbyte
Access Time: 200ns (best-case arbitration), 400ns (worst-case arbitration)
Transfer Rates:
6.2 Mbyte/s without redundancy
3.2 Mbyte/s with redundancy
VMEbus Compliance: ANSI/IEEE STD 1014-1987, IEC 821, and 297
Cable Type: ST Type Fiber-Optic, Multimode, 62.5 Micron core
Temperature Range: 0°C to 55°C operating, -40°C to 85°C storage
Power Requirements: 5.0A at +5VDC
MTBF (Mean Time Between Failures): 142,400 hours
Agency Approvals: UL1604 and C-UL certification for hazardous environments.
Network Performance & Monitoring:
The system provides a network monitoring feature to verify data flow across the fiber-optic ring, ensuring there are no breaks in the network and allowing latency measurements.
Protection Against Data Loss:
FIFO management prevents data loss by monitoring the buffer fill levels and generating interrupts if data accumulation approaches critical levels.
Conclusion:
The IC697VRM015 provides a robust solution for high-speed, efficient data transfer across distributed systems, with built-in error management, interrupt capability, and minimal processor overhead. This makes it ideal for applications where real-time data sharing and synchronization across multiple systems are critical.
>> GE Fanuc IC697VRM015 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)