6ES7 195-7HG00-0XA0

Siemens 6ES7195-7HG00-0XA0 ET 200M Bus Module for Safety Protector

6ES7195-7HG00-0XA0 is the bus module that connects the safety protector to the active backplane bus in SIMATIC ET 200M stations. Listed within the Siemens industrial automation range as an F separator bus module, it is used with the separate 6ES7195-7KF00-0XA0 safety protector. Record both order numbers separately when identifying replacement parts.

This component belongs to the ET 200M branch of the Siemens ET 200 distributed I/O family and forms part of the protection arrangement in stations containing standard and fail-safe signal modules. For machine and process automation applications, record the station layout, interface module and bus base labels together to establish which component is required.

The roles of the bus base and safety protector

The 7HG00 bus base provides the connection; the 7KF00 safety protector protects F modules against excessive fault voltages. In maintenance records for PLC-based control systems, list these as separate items. Identifying a removed assembly solely from its front view can lead to selecting the upper module when the underlying base is the component that needs replacement.

Five checks before selection or replacement

1. Complete order number and station configuration: Confirm 6ES7195-7HG00-0XA0 on the label. When assessing ET 200 system architecture and module compatibility, refer to the installed F modules and the manufacturer's rules for using the safety protector. Requirements vary between configurations. Preserve the protection arrangement specified in the project during maintenance.

2. Mounting rail and installation space: The safety protector arrangement on the active bus adds 80 mm to the ET 200M station width. Check that the appropriate active bus mounting rail is fitted. When preparing spare parts for SIMATIC S7 control systems, measure the available rail space and record adjacent module positions; the safety protector's individual width does not describe the space required by the complete assembly.

3. Module sequence and grounding: Install standard modules to the left, the safety protector between them, and F modules to the right. Check rail grounding and the protector's functional ground connection against the manufacturer diagram. Include a photograph of the module sequence in maintenance records for Siemens PLC and I/O products to support correct reassembly.

4. Removal during operation: The safety protector must remain fitted while this bus base is operating. Siemens prohibits inserting or removing the protector during operation because this causes the ET 200M to fail. Schedule replacement under the plant's safe shutdown and energy isolation procedures.

5. Physical inspection and recommissioning: After isolating energy sources, inspect the bus contacts, housing and mechanical locking points. Do not force an assembly into position if contact surfaces are damaged or parts are missing. After replacement, check station and F module diagnostics, compare HMI operator panel alarm records with the maintenance baseline and complete the plant's verification procedure.

PDF manuals and technical documents

Visit the Siemens ET 200 PDF manuals page for related documentation. In Fail-safe signal modules, 07/2013, A5E00085586-11, Section 2.3 covers application requirements and Section 10.3 installation arrangements. Review the operating warning and active bus layout on pages 324–325. Share label and installation photographs through Siemens product technical enquiries.

Editor's note: Replace a general description such as “ET 200M separator” in the spare parts list with separate entries for the 7HG00 bus base and 7KF00 safety protector, including their complete order numbers. Front and side photographs help identify the component being replaced and make maintenance preparation more precise.

Related topics and Siemens navigation

Product families
Siemens main menu  |  Siemens PLC products  |  SIMATIC S7

ET 200 resources
ET 200 products  |  ET 200 system overview  |  ET 200 PDF manuals

Control and assistance
HMI operator panels  |  SCADA systems  |  Siemens product enquiries