6ES7 132-7GD00-0AB0

Siemens main menu › SIMATIC S7 › SIMATIC ET 200

Siemens 6ES7 132-7GD00-0AB0 — ET 200iSP 4 DO 23.1 V/20 mA L-Shutdown Module

6ES7 132-7GD00-0AB0 is an ET 200iSP electronic module with four digital outputs and an L-shutdown input, belonging to the Siemens ET 200 distributed I/O family. It controls suitable intrinsically safe solenoid valves, DC relays and actuators. Among ET 200 digital output modules, its defining features are the 23.1 V/20 mA output characteristic and an external shutdown input that activates at a low signal level.

Order number: 6ES7132-7GD00-0AB0
Series: SIMATIC ET 200iSP
Outputs: 4 DO
Rated current per channel: 20 mA
No-load output voltage: 23.1 V DC
Additional input: Intrinsically safe L-shutdown signal

Understanding the 23.1 V output rating

23.1 V is the no-load output voltage. The 2017 Siemens data sheet for this exact order number specifies a characteristic break point of 17.6 V / 20 mA. Valve selection must also account for coil pickup requirements and cable voltage drop. When reviewing the ET 200 system architecture, distinguish the station supply provided by ET 200 power supply modules from the electrical capability of this actuator output.

Five checks before selection or replacement

1. L-shutdown behaviour: With external shutdown enabled, a low-level signal switches off all four outputs together without changing the PLC output process image. An output bit can therefore remain set while the actuator is de-energized. During troubleshooting, check both the external signal and the corresponding project parameter. H-shutdown and L-shutdown modules use different signal logic.

2. Paralleling for higher current: This model does not permit outputs to be connected in parallel to increase current. Siemens excludes this arrangement for Ex reasons. Parallel-output examples for certain 17.4 V ET 200iSP modules must not be applied to this 23.1 V/20 mA version.

3. Actuator and Ex circuit compatibility: Assess the field device certificate, permitted module circuit parameters and cable characteristics together. When selecting ET 200 safety modules, distinguish explosion protection from functional safety requirements. An L-shutdown input does not make this a PROFIsafe F-DO module.

4. Terminal base and station: Identify the appropriate ET 200iSP TM-IM/EM or TM-EM/EM base among ET 200 terminal blocks and verify its full order number. Record the installed ET 200 connection modules, ET 200 communication interface and ET 200 power distribution arrangement. Physical resemblance alone does not establish base compatibility.

5. Project and diagnostics: Review the configured hardware, output addresses and selected CPU/master STOP behaviour in the Siemens S7 control system. The module supports wire-break and short-circuit diagnostics. As with other ET 200 special-function and additional modules, retain a parameter backup and channel-specific fault details before replacement.

Distinguishing similar order numbers

6ES7132-7RD01-0AB0 is the H-shutdown option in the same 23.1 V/20 mA class. 6ES7132-7GD10-0AB0 and 6ES7132-7GD21-0AB0 are L-shutdown versions rated at 17.4 V/27 mA and 17.4 V/40 mA, respectively. These code differences matter for the field load and shutdown arrangement; having four outputs does not establish interchangeability.

Editor's note

Include the complete module code, actuator label and L-shutdown wiring details in a spare-part enquiry. A set PLC output bit does not by itself confirm an energized field output. If all four channels are inactive, include the shared shutdown input in the investigation.

Manuals and PDF documentation

Find ET 200iSP documentation on our Siemens ET 200 PDF and user manuals page. A5E00247483-04, section 12.2 and product information A5E02264172-06 describe 4 DO operation and wiring. Use the data sheet for the exact order number for electrical selection, and the applicable certificate and ET 200iSP Intrinsic Safety Control Drawing for the Ex assessment.

Related topics and Siemens navigation

Product family: Siemens main menu  |  SIMATIC S7  |  ET 200 family

Station and field devices: Digital output modules  |  Terminal blocks  |  PROFIBUS and PROFINET

Technical resources: About ET 200  |  Power supply modules  |  ET 200 PDF manuals