6ES7 132-4BD02-0AA0
Siemens main menu › SIMATIC S7 › SIMATIC ET 200
Siemens 6ES7 132-4BD02-0AA0 — ET 200S 4 DO 24 V DC/0.5 A Standard Output Module
6ES7 132-4BD02-0AA0 is an ET 200S standard (ST) electronic module with four digital outputs, part of the Siemens ET 200 distributed I/O family. It controls suitable 24 V DC solenoid valves, DC contactor coils and indicator lights. This model in the ET 200 digital output range uses PNP current-sourcing transistor outputs; it does not provide potential-free relay contacts.
Order number: 6ES7132-4BD02-0AA0
Output configuration: 4 DO, Standard / ST
Load voltage: 24 V DC
Rated current per channel: 0.5 A
Total output current per module: Maximum 2 A
Width: 15 mm
Four outputs versus a five-module package
The Siemens catalogue wording “5 electronic modules” or “5 pieces per packaging unit” describes a package containing five modules. Each individual module has four outputs. Specify whether you require an individual module or a complete package; the manufacturer's packaging quantity does not establish a seller's delivery quantity.
Five checks before selection or replacement
1. Load current and switching: Assess both the 0.5 A per-channel rating and the 2 A module limit. Check coil inrush and lamp loads separately. Do not parallel outputs to increase current capacity. A 24 V load rating alone does not establish suitability for direct connection.
2. Supply group: Within the ET 200 system architecture, this module receives its load supply from the power module. When checking ET 200 power supply modules and the ET 200 power distribution arrangement, consider the combined load of the potential group, available supply capacity and protective devices.
3. Terminal base: Compatible bases listed in the Siemens manual include TM-E15S24-01 / 6ES7193-4CB20-0AA0 and TM-E15C24-01 / 6ES7193-4CB30-0AA0. When selecting among ET 200 terminal blocks, compare the installed base's complete code and connection type. Terminal availability and AUX connections vary between ET 200 connection components.
4. Hardware project: Check the ET 200 communication interface together with the Siemens S7 hardware configuration. The specified address space is 1 byte, or 4 bits with supported address packing. During replacement, verify that the output addresses match the valve and contactor commands in the program.
5. Protection versus diagnostics: Short-circuit protection is provided, but the module has no diagnostic function. A green channel LED indicates an active output; it does not prove that the load has operated. Where feedback is required, monitor the relevant sensor or auxiliary contact through ET 200 digital input modules. If the LED is on but the load does not operate, investigate the supply, wiring, connections and load separately.
Scope of the standard module
This is a standard digital output module. Channel count alone is insufficient when replacing an HF, relay-output or safety-related module. If the application requires a different output function, review the ET 200 special-function and additional modules as well. Select a replacement using the complete order number, existing project and field wiring together.
Editor's note
Siemens notes that switching on the power module's 24 V supply through a mechanical contact can, depending on the circuit, produce a “1” signal lasting approximately 50 µs at the outputs. This matters when an output feeds a fast counter. Distinguish a normal output command from a brief pulse during supply switching.
Manuals and PDF documentation
On our Siemens ET 200 PDF and user manuals page, use the 4DO DC24V/0.5A ST — A5E01254028-01 manual for this product. It covers terminal assignments, compatible bases, electrical limits and LED indications. Consult the ET 200S system manual alongside it for general station installation requirements.
Related topics and Siemens navigation
Product family: Siemens main menu | SIMATIC S7 | ET 200 family
Station and field devices: Digital output modules | Terminal blocks | PROFIBUS and PROFINET
Technical resources: About ET 200 | Power supply modules | ET 200 PDF manuals