6ES7 132-4BB30-0AA0
Siemens main menu › SIMATIC S7 › SIMATIC ET 200
Siemens 6ES7 132-4BB30-0AA0 — ET 200S 2 DO 24 V DC/2 A Standard Output Module
6ES7 132-4BB30-0AA0 is an ET 200S standard electronic module with two digital outputs, part of the Siemens ET 200 distributed I/O family. It controls suitable 24 V DC solenoid valves, DC contactor coils and indicator lights. Within the ET 200 digital output range, this model provides 2 A per channel; it must not be treated as a relay-output or High Feature module.
Order number: 6ES7132-4BB30-0AA0
Series and class: ET 200S / Standard
Outputs: 2 DO
Load voltage: 24 V DC
Rated current per channel: 2 A
Total output current: 4 A per module
Width: 15 mm
Two channels, 4 A total: not 4 A from one output
The total current rating describes the combined load of both channels. It does not provide a 4 A output for a single load. Connecting outputs in parallel to increase current capacity is not permitted. Loads requiring higher current need a separately selected switching device and protection arrangement appropriate to the application.
Five checks before selection or replacement
1. Field load: Check the valve or contactor coil's operating voltage, continuous current and behaviour when first energized. A 2 A output rating does not mean every load drawing that current can be switched at the same frequency. Apply the manufacturer's relevant load limits for coils and lamps.
2. Supply group: In the ET 200 system architecture, the power module provides the load supply for these outputs. When reviewing ET 200 power supply modules and the ET 200 power distribution arrangement, include the other loads in the same potential group. A voltage drop or interrupted group supply can make a healthy output module appear faulty.
3. Terminal base: Siemens wiring examples include TM-E15S23-01 and TM-E15S24-01 bases. When selecting among ET 200 terminal blocks, compare the full base code, terminal arrangement and existing wiring. Do not select ET 200 connection components solely by their 15 mm width; equal dimensions do not establish equal function.
4. Hardware definition and addresses: Check the configuration supported by the ET 200 communication interface against the module definition in the Siemens S7 hardware project. The specified address space is 1 byte without packing or 2 bits with supported packing. After replacement, verify that each channel command operates the intended field load.
5. Protection and troubleshooting: Short-circuit protection is provided, but the standard module has no diagnostic function. A channel LED and actual load operation provide different information. Where valve position or contactor operation must be monitored, evaluate suitable feedback through ET 200 digital input modules. Investigate the output command, load supply, connections and coil together.
Distinguishing 4BB30, 4BB31 and the 0AA0–0AB0 suffixes
Siemens identifies 6ES7132-4BB31-0AA0 as the successor to 6ES7132-4BB30-0AA0. Compare the hardware catalogue, interface support and wiring before replacement. 6ES7132-4BB30-0AB0 is the High Feature version, despite sharing the 4BB30 portion of the code. Omitting the suffix can confuse standard and diagnostic-capable versions. Review ET 200 special-function and additional modules where different functions are required.
Editor's note
Include the complete order number, terminal base and connected load's nameplate in a spare-part enquiry. Siemens specifies a five-module packaging unit for this code; that is not the channel count of an individual module. Each module has two outputs, and the number of modules to be supplied must be agreed separately.
Manuals and PDF documentation
Consult the ET 200S documentation on our Siemens ET 200 PDF and user manuals page. This older model is covered in EWA-4NEB780602402-09, section 12.14, and in the later EWA-4NEB780602402-12, section 11.14. Since section numbering changes between editions, search the PDF for 6ES7132-4BB30-0AA0. Do not automatically apply successor specifications to the older module.
Related topics and Siemens navigation
Product family: Siemens main menu | SIMATIC S7 | ET 200 family
Station and field devices: Digital output modules | Terminal blocks | PROFIBUS and PROFINET
Technical resources: About ET 200 | Power supply modules | ET 200 PDF manuals