6ES7 193-4CC20-0AA0
Siemens Main Menu | SIMATIC S7 | Siemens ET 200 | PDF Manuals
6ES7 193-4CC20-0AA0 — Siemens ET 200S TM-P15S23-A1 Terminal Module
Series: SIMATIC ET 200S
Product type: Screw-terminal base for power modules
Order number: 6ES7193-4CC20-0AA0
6ES7 193-4CC20-0AA0 is the TM-P15S23-A1 terminal module for ET 200S stations in the Siemens ET 200 distributed I/O family. It supports a compatible power module and provides its supply connections. Among ET 200 terminal blocks, this model is identified by its 15 mm width, screw terminals and continuous AUX1 bus.
Function and connection arrangement
Together with the fitted power module, the base provides the infeed for a new potential group extending to the next TM-P terminal module. ET 200 power supply modules and their bases are separate components; this base does not generate a supply voltage on its own.
The AUX1 bus remains electrically connected to the adjacent potential group on the left. Starting a new supply group therefore does not also isolate AUX1. Account for this distinction when defining group boundaries in the ET 200 power distribution arrangement. AUX1 is accessible through terminals A4 and A8.
Key technical details
Terminal type: TM-P15S23-A1.
Connection: Screw terminals, 2 × 3 connection points.
Dimensions: 15 × 132 × 43 mm (width × height × depth).
AUX1 arrangement: Continuous connection to the group on the left, with terminal access.
Application: Connection base for compatible ET 200S power modules.
2 × 3 connection points does not mean six input or output channels. It describes the physical terminal arrangement. Follow the wiring diagram for the fitted power module when assigning conductors to these terminals.
Selection and replacement checks
1. Confirm the hardware family. Within the ET 200 system architecture, ET 200S, ET 200SP and ET 200iSP are separate hardware families. Even where a SIMATIC S7 control system is installed, select against the remote station’s actual hardware list.
2. Distinguish A1 from A0. 6ES7193-4CD20-0AA0 / TM-P15S23-A0 interrupts AUX1 towards the left; the 4CC20 / A1 version described here maintains continuity. Do not select replacement ET 200 connection modules solely by dimensions and terminal count.
3. Check the terminal technology. 6ES7193-4CC30-0AA0 / TM-P15C23-A1 is the spring-terminal version in the same family. Consider existing wire preparation and maintenance practices when choosing between screw and spring connections.
4. Keep interface and supply functions separate. ET 200 communication interface modules handle the station’s network connection. TM-P15S23-A1 does not provide a standalone PROFIBUS or PROFINET communication function.
5. Inspect condition and scope of supply. For a used assembly, confirm whether the power module is included. Inspect screw seats, contacts, side connections and the rail lock, and identify any missing ET 200 additional modules and accessories.
Editor’s note
AUX1 continuity is the decisive selection detail. The A1 arrangement maintains the potential arriving from the left. Using it where separation is required can change the intended wiring arrangement. If the label is unreadable, do not identify the base by appearance alone. Send photographs of the base label, fitted power module and neighbouring bases through the Otomasyon AVM Siemens product enquiry page.
PDF manuals and documentation
For wiring diagrams, refer to the ET 200S documents on the Siemens ET 200 PDF manuals page. A5E01120034-01 Terminal Modules, section 1.2 covers the TM-P15x23-A1 family and AUX1 continuity. For terminal assignments, conductor cross-sections and tightening torque, also follow the applicable power-module and system installation instructions.
Related topics and Siemens navigation
Terminal blocks | Power supply modules | Power distribution modules
Connection modules | Additional modules and accessories | ET 200 system architecture
Siemens Main Menu | SIMATIC S7 | Siemens ET 200 | PDF Manuals