6ES5 921-3WB14
Siemens 6ES5 921-3WB14 — CPU 921WB processor for PLC 130WB / SINUMERIK
Siemens 6ES5 921-3WB14 is a CPU 921WB central processor module associated with the 130WB central controller and integrated PLC 130WB in SINUMERIK 3/8 systems. Within the Siemens S5 family, this central processor executes the machine’s PLC program.
Depending on the machine builder’s program, its tasks can include clamping, lubrication, tool-change sequencing and operating permissions. Identify the PLC program, NC software and machine data separately during maintenance; replacing the CPU does not establish that those contents are correct.
WB14 version and replacement checks
6ES5 921-3WB11, 6ES5 921-3WB13 and 6ES5 921-3WB15 are different order numbers within the 921WB family. Check the board revision, basic program, NC/PLC software combination and memory hardware together before replacement. Similar appearance does not establish interchangeability.
6ES5 921-3WA13 is a comparison point for different 130W hardware. Record the 3WB14 label and its position in the rack. Do not transfer the memory or connection specifications of another CPU 921 version to this board.
Internal RAM and EPROM receptacles
Siemens’ 130WB family documentation describes approximately 2.9 K instructions / 5.8 KB of onboard user RAM. It also shows two EPROM submodule receptacles, for the basic and user programs. User EPROM options are listed as 4 K, 8 K and 16 K words; the actual arrangement depends on the fitted memory submodules and system option.
16 K words is not the same capacity as 16 KB. Check which memory items are included, their software labels and whether their contents can be read. A maximum option described in a family manual does not establish the capacity fitted to a particular used board.
STEP 5 program and NC/PLC relationship
For PLC programming work, preserve the STEP 5 blocks, data blocks and existing project files together. When reviewing ladder or function block diagram representations, verify that symbols and comments belong to the same version as the program read from the machine.
In a SINUMERIK application, assess the basic interface program and machine-specific user program together. Reaching RUN does not establish correct signal exchange with the NC. Match signal checks to the machine’s electrical drawings and installed software version.
PG connection, power and peripheral modules
Determine PG access from the programming interface installed in the system. Where fitted, record the 6ES5 511-5AA12 PG interface and S5 connection cable. Do not apply the pin assignment or electrical standard of an NC serial port directly to the PLC programming connection.
Check the S5 power supply and backplane connections. Include the roles of communication modules and expansion interfaces in the maintenance record. Gather separate evidence for power, memory and connection faults.
Compare addresses for the digital inputs, digital outputs, analog modules and combined I/O boards with the existing project. Select sensor and load voltages from the actual peripheral-board label and wiring drawing.
RUN/STOP, reset and diagnostics
The 130WB front panel includes RUN/STOP indicators, an operating switch, Reset/Rücksetzen and Restart/Wiederanlauf controls. These functions are different. Preserve the program, data values and existing fault information before restarting or clearing memory.
For PLC debugging, record U-Stack/ISTACK and B-Stack information together with the NC alarm and LED states. Use those records to distinguish memory-addressing problems from program-execution faults. Application testing should also verify operating permissions, inputs and the actual behaviour of outputs.
Editor’s note
When buying this board used, start with a clear 3WB14 label and a view of the memory receptacles. In S5 maintenance, the correct program matters as much as the board’s condition. Photograph memory labels before removing or disturbing anything.
Two occupied receptacles do not establish that the machine program is complete. Identify the basic and application contents and the machine and software version they belong to. Memory taken from another machine is not automatically a ready-to-use spare.
A RUN indication is useful, but tool changing, clamping and lubrication still need their own functional checks. Keep bench-test results distinct from functions verified on the machine.
Do not begin with a memory clear when the processor enters STOP. Preserve accessible PG information, record the NC alarm and check the supply first. Avoid losing the program and fault evidence needed for the next step.
Do not insert or remove the board under power. Inspect bent connectors, corrosion and previous repairs. If the board does not seat correctly, check its guide and socket rather than forcing it. Photograph memory-submodule orientation as well.
If offered a WB11, WB13 or WB15, ask for compatibility with the existing NC version, basic program and memory arrangement. The test record should identify the system, program and interface used.
OtomasyonAVM resources and documentation
+ 6ES5 921-3WB14 model page · Second-hand Siemens S5 models · About Siemens S5 PLCs.
130WB memory and diagnostic information and SINUMERIK commissioning documents are linked in the Siemens references below.
Related topics and models
+ 6ES5 921-3WB11 · 6ES5 921-3WB13 · 6ES5 921-3WB15: version comparisons within the 921WB family.
+ 6ES5 921-3WA13: comparison with different 130W hardware. These links do not establish suitability for direct replacement.
Browse SIMATIC S5
SIMATIC S5 processors · S5 memory modules · S5 cables · S5 interface modules · Second-hand Siemens products
Siemens and external references
+ Siemens System 8 commissioning checklist and instructions, Part I/2 — German PDF. Chapter 18: PLC 130WB; printed page 18-2: 6ES5 921-3WB family memory arrangement and front panel, followed by program and diagnostic information.
+ Siemens SINUMERIK System 3 Installation Guide — 6ZB5 410-0CH02-0AA0, 05.1989, English. Chapter 11: PLC 130WB, startup routines and NC/PLC software compatibility; Chapter 12: PLC modules and jumper arrangements.