6ES5 242-1AA21

Siemens 6ES5 242-1AA21 SIMATIC S5 242 Compact Counter Module

Siemens 6ES5 242-1AA21 is a 242-series compact counter module that counts field pulses in SIMATIC S5 PLC systems. It belongs to the S5 special function module range.

Technical features. The exact order number is documented as a compact pulse counter. A Siemens specification table for the 1AA21 channel count, input levels, maximum counting frequency and pin assignments could not be located. Check the machine drawings for the installed signals and wiring, and the STEP 5 project for the counting logic.

Signal tracing. If an encoder or pulse sensor supplies the signal, check the field connector and cable run first. Use the schematic to trace any digital inputs that enable counting and any digital outputs controlled by the count.

Rack and project. On an S5-115U installation with a CR 700-0LA, for example, record the actual rack type and power supply code. If the board is in an expansion rack, record the IM interface too. On a CPU 944 installation, use the appropriate PG cable to back up STEP 5 and record the address used by the block that reads the counter.

Variant selection. 1AA12, 1AA13, 1AA31, 1AA32 and 1AA41 are separate order numbers. If the project also uses an IP 240 counter and position decoder, identify the suspect board by matching its STEP 5 address with its rack label.

Editor’s note

Before removal, photograph the 1AA21 label, revision, slot and front plug. Record the address used by the STEP 5 block that reads the counter.

If the count stays at zero, verify that pulses reach the board and that the program allows counting.

If the value rises and then suddenly returns to zero, monitor the STEP 5 reset condition before replacing the board.

If counts are lost only at higher speeds, compare the pulse source with the signal at the card. Check pulse width, cable shielding and connector contact.

Test a spare with a known number of pulses. Record the starting and ending count, the input tested and the pulse frequency.

Related topics

+ IP 242 compact counter 1AA13

+ IP 242A counter 1AA32

+ IP 241 position decoder

Siemens second-hand menu

+ S5 special modules

+ SIMATIC S5

+ Second-hand Siemens automation equipment

Before buying, ask for a label photo, the front plug and a pulse test record. To sell one, send the order number, quantity, working condition, label photo and asking price to otomasyonavm@gmail.com.

Manuals and PDF archive

+ OtomasyonAVM Siemens S5 PDF archive

External references

+ ADEGIS S5 parts list, 6ES5242-1AA21

+ Siemens ST 53 catalog, compact 242 family (DE)

+ Siemens IP 242A/B manual, 1AA32 and 1AA41 coverage