6ES5 184-3UA21
Siemens 6ES5 184-3UA21 — SIMATIC S5 EU 184U Expansion Rack
The Siemens 6ES5 184-3UA21 is a 21-slot EU 184U expansion rack for adding I/O to an S5-135U/155U system in the SIMATIC S5 range. This version of the S5 rack range includes a fan assembly and a cable duct. Siemens lists its weight at approximately 13 kg.
Fan supply and module power
The 24 V DC supply powers the fan assembly. The rack modules receive their operating power through the interface connection. In a system with a 6ES5 188-3UA22 central rack, for example, the CPU and 6ES5 955-3LF42 system power supply remain in the main rack. When sourcing a fan assembly, compare the fitted nameplate with the 6ES5 988-3NA11 24 V DC fan chassis.
The 6ES5 184-3UA11 is the AC fan variant of the EU 184U. The EU 183U and EU 185U families have their own system power supply. For a rack replacement, check the full order number, fan voltage and interface pairing.
Interface and cable selection
Select the S5 interface modules as a pair. The host side uses an IM 300-5C (6ES5 300-5CA11) or the centralized connection on an IM 301-5 (6ES5 301-5CA12). The expansion rack side uses an IM 312-5. Siemens specifies a 5 A maximum per connection for the IM 300-5C.
The IM 312-5 has a permanently attached cable. The 6ES5 312-5CA11 has a 0.5 m cable and the 6ES5 312-5CA21 has a 1.5 m cable. When reviewing S5 cable types, check the attached connectors and the cable reach inside the cabinet.
Module compatibility and addressing
The EU 184U accepts digital input, digital output and analog I/O modules in the designated slots. Verify the field signal against the module’s own order number. For example, the 6ES5 435-4UA12 digital input module accepts 24–60 V AC signals. Record the full code, slot and address for any combined digital I/O modules as well.
Siemens lists suitable IP signal preprocessing modules that operate without page addressing for the EU 184U. For applications requiring a page-addressed IP or a CP communications processor, consult the EU 185U slot table. When moving modules, check that the expansion rack addresses do not overlap those used in the main rack.
Buying a used rack
Ask for separate photographs of the rack and fan assembly nameplates. Confirm whether the IM 312-5 and its attached cable are included. Inspect the backplane connectors, card guides, fan assembly and mounting brackets. Keep the intake and exhaust clearances when installing the rack in a cabinet.
Editor’s Note
Ask for two separate bench test results. First, verify that the 24 V DC fan assembly runs. Then verify that the CPU reads a known-good input module in the rack through the correct IM 312-5 connection. This checks cooling and the backplane connection independently.
PDF archive
See printed pages 4-15–4-18 for the rack and slot layout, 7-2–7-4 for the IM 300-5C and IM 312-5 connection, and 7-10 for the IM 301-5. Shared Siemens SIMATIC S5 PDF archive
Related topics
About Siemens S5 PLCs · S5 interface modules
Navigation · S5 central units and expansion racks · Siemens SIMATIC S5 PLC · Used Siemens automation equipment
References
Siemens S5-135U/155U System Manual, C79000-G8576-C199-07 (EN)
Siemens S5-135U/155U Supplement to the Manual, C79000-Z8576-C199-01, p. 2 (EN)