2 wire AC 220v - NC inductives

Hi,
There are 2-wire proximity sensors that are normally closed (NC) and are designed to be used with AC 220V power supply. These sensors have a sensing face that can detect metal objects and a built-in switching element that opens the circuit when a metal object is detected.
The NC 2-wire sensors work differently than the normally open (NO) type. When the sensing face detects a metal object, the switch in the sensor opens, which disconnects the load. This makes them suitable for applications where you want the load to be disconnected when the metal object is detected.
It's important to note that the maximum load current for these sensors is usually specified by the manufacturer, and it's important to make sure that the load current doesn't exceed this rating. Additionally, the sensors must be connected in series with the load, and the load must be able to handle the AC voltage being switched.
If you're planning to use these sensors in your application, make sure to read the manufacturer's datasheet carefully and follow their recommendations for wiring and installation to ensure safe and reliable operation.
+ Standart 3 wire DC inductive Sensors
+ All industrial sensor models
+ PLC for sensor -2 Telli m12 İndüktif sensör NC -220V
M12M-BC2TC-4KH is an inductive proximity sensor. It is used for non-contact detection of metal targe..
50.00USD Ex Tax: 50.00USD
2 Telli M12 İndüktif sensör NC -220V
M12M-CD2TD-2KH is an inductive proximity sensor. It is used for non-contact detection of metal targe..
50.00USD Ex Tax: 50.00USD
2 Telli M18 İndüktif sensör NC -220V
2 Telli M18 İndüktif sensör NC -220 Volt ile 90v Ac gerilim aralığında çalışırDevreye seri bağlantı ..
50.00USD Ex Tax: 50.00USD
2 Telli M18 İndüktif sensör NO -220V
2 Telli M18 İndüktif sensör NO -220 Volt ile 90v Ac gerilim aralığında çalışırDevreye seri bağlantı ..
55.00USD Ex Tax: 55.00USD


