2 Wire NO - Dc inductive sensors

Hi,

There are 2-wire DC proximity sensors with a Normally Open (NO) output configuration, which means the sensor's output is open (no electrical connection) when no target is detected and closes (electrical connection) when a target is detected.

However, these NO sensors are less common than the Normally Closed (NC) configuration. It is important to check the sensor's datasheet or consult with the manufacturer to confirm the output configuration before making a purchase.

Please note that despite the confusion, our website no longer carries NAMUR sensor models. 80% of our sales were for two-wire sensors, and we had to replace them all due to customers' confusion. However, we do have NAMUR sensors in stock, so feel free to contact us if you need them for your application.

Dear visitors, like all the products on our website, our inductive sensors are devices produced for professional purposes aimed at the industrial automation sector. They have galvanic isolation and high switching speed, making them able to work in the same environment as possible electrical parazite generating devices such as frequency inverters, power sources, and induction motors. (Do not confuse them with economic series sensors)

+ Standart 3 wire DC inductive Sensors

+ All industrial sensor models

+ Control devices for sensor

+ Switch Meterials

+ PLC for sensor -

+ Maybe you should check the second-hand section -