Yaskawa J7

About Yaskawa J7 VFD;

The Yaskawa J7 VFD is a variable frequency drive that has a rated input voltage range of 3-phase 200 to 230V and single-phase 200 to 240V. The input frequency must be 50/60Hz and the allowable voltage and frequency fluctuations are -15 to +10% and ±5% respectively. The drive operates using sine wave PWM (V/f control) and the frequency control range is 0.1 to 400Hz. The frequency accuracy is ±0.01% to ±0.5% depending on temperature change. The output frequency accuracy is 0.01Hz and the overload capacity is 150% of rated output current for one minute.

The drive also has features such as overvoltage, undervoltage, momentary power loss, cooling fin overheat, braking torque, V/f characteristics, motor overload protection, speed search, and communication/control circuit features.

In addition, the J7 VFD has multi-function input and output signals. Input signals include reverse run, fault reset, external fault, multi-step speed operation, Jog command, accel/decel time select, external baseblock, speed search command, accel/decel hold command, LOCAL/REMOTE selection, and emergency stop alarm. Output signals include fault, running, zero speed, at frequency, frequency detection (output frequency ≤ or ≥ set value), minor error, during baseblock, operation mode, inverter run ready, during fault retry, during UV, during speed search, and data output through communication.

Standard functions include full-range automatic torque boost, slip compensation, DC injection braking current/time at start/stop, frequency reference bias/gain, and MEMOBUS communications (RS-485/422, max. 19.2K bps).



It's important to note that this drive is designed for various applications and it's important to carefully read the user manual and take all safety precautions while using it.
otomasyon avm
more please

In addition to the features and functions already mentioned, the Yaskawa J7 VFD also has the following features:

+ Control method: Sine wave PWM (V/f control)
+ Frequency control range: 0.1 to 400Hz
+ Frequency accuracy (temperature change): Digital reference: ±0.01% (-10 to +50°C) Analog reference: ±0.5% (25±10°C)
+ Frequency setting resolution: Digital reference: 0.1Hz (less than 100Hz) / 1Hz (100Hz or more) Analog reference: 1/1000 of max. output frequency
+ Output frequency resolution: 0.01Hz
+ Overload capacity: 150% rated output current for one minute
+ Frequency reference signal: 0 to 10VDC (20kΩ), 4 to 20mA (250Ω), 0 to 20mA (250Ω)
+ Frequency setting volume: (Selectable)
+ Accel/Decel Time: 0.1 to 999sec. (accel/decel time are independently programmed)
+ Braking torque: Short-term average deceleration torque‡ 0.13HP, 0.25HP (0.1, 0.25kW): 150% 0.5HP, 1HP (0.55, 1.1kW): 100% 2HP (1.5kW): 50% 3HP (2.2kW) or more: 20% Continuous regenerative torque: Approx. 20%

+ Yaskawa VS mini J7 User manual   (pdf)

+ Yaskawa VS mini J7 Technical manual   (pdf)

+ Yaskawa VS mini J7 DS031 + Ds033 Operator panel   (pdf)

+ Yaskawa VS mini J7 instruction manual   (pdf)

+ Yaskawa VS mini J7 Remote keypad   (pdf)


Refine Search