MKDT-VGA

MKDT-VGA is an operator panel identified by its complete hardware code in the UniOP MKD family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.

Match the supply, port layout and cabinet cut-out of MKDT-VGA against its nameplate and technical drawing. Compare connector orientation and mounting dimensions with the installed panel.

UniOP MKD includes legacy keypad and touch-panel options. VGA, display type and the T or TA suffixes are distinct hardware identifiers; do not select a replacement by appearance alone. Use the complete MKDT-VGA code when selecting within this family.

What matters on the installed machine?

The display arrangement of MKDT-VGA must be checked on the installed nameplate and front panel. Compare MKDF-02 before deciding on a substitute. Matching a plug does not preserve the operator’s screen and key layout.

For MKDT-VGA, verify the Designer / Designer 6 release, protocol option and whether the archived project opens. A related code such as MKDF-02 does not establish the same software target.

Record the current display behavior before changing MKDT-VGA. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.

Around MKDT-VGA, compare MKDF-04, MKDG-05 and MKDG-06. Check each complete code and connection on its own page.

PDF manuals

Documents include UniOP Installation Guide v1.08, UniOP OEM installation guide. For MKDT-VGA, match the full code and hardware period against UniOP MKD PDF Manuals.