MKDG-06
MKDG-06 is an operator panel identified by its complete hardware code in the UniOP MKD family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.
Match the supply, port layout and cabinet cut-out of MKDG-06 against its nameplate and technical drawing. Compare connector orientation and mounting dimensions with the installed panel.
UniOP MKD includes legacy keypad and touch-panel options. VGA, display type and the T or TA suffixes are distinct hardware identifiers; do not select a replacement by appearance alone. Use the complete MKDG-06 code when selecting within this family.
What matters on the installed machine?
The display arrangement of MKDG-06 must be checked on the installed nameplate and front panel. Compare MKDF-02 before deciding on a substitute. Matching a plug does not preserve the operator’s screen and key layout.
For MKDG-06, verify the Designer / Designer 6 release, protocol option and whether the archived project opens. A related code such as MKDF-02 does not establish the same software target.
Record the current display behavior before changing MKDG-06. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.
Around MKDG-06, compare MKDF-04, MKDG-05 and MKDG-07. Check each complete code and connection on its own page.
PDF manuals
Documents include UniOP Installation Guide v1.08, UniOP OEM installation guide. For MKDG-06, match the full code and hardware period against UniOP MKD PDF Manuals.