TP01R-16

TP01R-16 is an operator panel identified by its complete hardware code in the UniOP TP family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.

Match the supply, port layout and cabinet cut-out of TP01R-16 against its nameplate and technical drawing. Compare connector orientation and mounting dimensions with the installed panel.

For UniOP TP operator panels, verify the complete hardware revision, colour capability and display type together. Confirm ports and programming environment before transferring a project. Use the complete TP01R-16 code when selecting within this family.

What matters on the installed machine?

The display arrangement of TP01R-16 must be checked on the installed nameplate and front panel. Compare TP01C-16 before deciding on a substitute. Matching a plug does not preserve the operator’s screen and key layout.

For TP01R-16, verify the Designer / Designer 6 release, protocol option and whether the archived project opens. A related code such as TP01C-16 does not establish the same software target.

Record the current display behavior before changing TP01R-16. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.

For TP01R-16, compare the display and hardware details on TP01C-16. Check the suffix, port layout and cabinet cut-out of each family member against the installed device.

PDF manuals

Documents include UniOP Installation Guide v1.08, UniOP Installation Guide v1.09. For TP01R-16, match the full code and hardware period against UniOP TP PDF Manuals.