Toshiba VFD fault codes

Toshiba VFD fault codes and troubleshooting

Toshiba VFD Fault Codes and Troubleshooting

Toshiba VFD fault codes help identify problems related to the motor, load, power supply, temperature, communication or internal drive electronics. Simply resetting a fault does not mean the problem has been fixed. The cause should be found and corrected before the inverter is returned to normal operation.

This section brings together Toshiba inverter fault codes, possible causes and practical troubleshooting checks. Depending on the fault, it may be necessary to check motor current, incoming voltage, acceleration and deceleration times, braking conditions, motor wiring or drive parameters.

Fault codes are not always the same across Toshiba VFD series. A code used on a VF-S15 may have a different meaning or troubleshooting procedure on a VF-S11, VF-AS1, VF-PS1, VF-NC or an older Toshiba drive. Always identify the exact inverter model before changing parameters or wiring.

For user manuals, parameter information and model-specific technical documents:
Toshiba VFD User Manuals and Technical Files

The original user manual should be used together with the fault-code information on this website. Older Toshiba drives in particular may have different terminal functions, parameter numbers and reset procedures from later models.

If the same fault keeps returning, avoid repeatedly resetting the inverter. Check the motor, mechanical load and electrical system first. Before making electrical measurements, changing wiring or opening the drive, follow the safety instructions in the relevant Toshiba manual.


Toshiba VFD Technical Links

Toshiba VFD user manuals | Toshiba main page | VFD main page


Refine Search